RTS ADAM manual Alarm Time Column, Resolved Time Column, Description Column

Frame Column

The Frame column displays the frame affected by the warning or alarm.

Alarm Time Column

The Alarm Time column displays the date and time (in 24-hour clock time) the alarm or warning occurred.

Resolved Time Column

The Resolved Time column displays the date and time (in 24-hour clock time) the alarm or warning was resolved.

Description Column

The Description column displays a description of the alarm or warning.

Hiding and Clearing Alarms

Some alarms can be cleared, as shown in the example below. Other alarms, such as loss of the backplane clock, can be hidden but cannot be cleared. The only way to clear these alarms from the window is to resolve them.

Example: Lost communications with the Trunk Master. In this case, the alarm is not regenerated unless the alarm condition is resolved, and then recurs. This means the Master Controller starts communicating with the Trunk Master again, and then loses communications again.

NOTE: You can also hide certain alarm type by selecting Hide this alarm type, if desired.

To hide or clear alarms/alarm types out of the Intercom Alarms window, do the following:

1.Right-click the alarm you want to clear. A popup menu appears.

2.From the popup menu, select Hide this alarm, Clear this alarm or Hide this alarm type.

38