Select Time from the Setup menu to display the Time Setup screen. The Time Setup screen allows you to set the internal timestamp of the UPS. The timestamp is used for logging events in the Event History Log. Figure 16 shows the Time Setup screen.
|
| Uninterruptible Power System |
|
| ||
UPS System Normal |
|
| 04 MAY 1997 | 14:23:45 | ||
Alarm: | None |
|
|
|
|
|
Notice: None |
|
|
|
|
| |
Battery |
|
|
|
|
| |
Percent |
|
| Set Time & Date |
| ||
100% |
|
|
| |||
|
|
|
|
| ||
|
|
| DAY DT MON YR HR:MN SAVE |
| ||
|
|
| MON 07 APR 97 15:06 | YES |
| |
Setup |
|
|
|
|
| |
Port 1 |
|
|
|
|
| |
Port 2 |
|
|
|
|
| |
Time |
|
|
|
|
|
|
Meters | Events | Statistics | Graphics | Setup |
|
|
Figure 16. Time Setup Screen
The small return arrow (
) appears in the upper right corner of the Time Setup
screen. This arrow is a reminder that you can press the 
pushbutton on the Monitor Panel to toggle the pushbuttons between the menu box and the information area. When the scroll bar is in the information area, the return arrow is in the menu box. When the scroll bar is in the menu box, the return arrow is in the information area.
When the scroll bar appears in the information area, you can use the pushbuttons to change the timestamp settings. To change a setting in the timestamp, press the 
and 
pushbuttons to highlight the setting you want to change. To increase the
setting (make it a higher value), press the 
pushbutton. To decrease the setting (make it a lower value), press the 
pushbutton. If you want to save the settings upon exit from this screen, be sure the SAVE field is set to YES.
Powerware 9315 (200 kVA | 29 |
164201036 Rev. D 041500 |
|