Configuring the Serial Ports
You must configure the port for communications using the LCD screen and pushbuttons on the UPS Monitor Panel.
Select Port 1 or Port 2 from the Setup menu to display one of the Setup Port screens. The screens for Port 1 and Port 2 are identical, and allow you to specify settings for the two serial communication ports. Figure 26 shows the Setup Serial Port 1 screen.
|
| Uninterruptible Power System |
|
| |||
UPS System Normal |
|
|
| 03 JAN 1997 | 14:23:45 | ||
Alarm: | None |
|
|
|
|
|
|
Notice: None |
|
|
|
|
|
| |
Battery |
|
|
|
|
|
| |
Percent |
|
|
|
|
|
| |
100% |
| Setup Serial Port 1 |
| ||||
|
|
|
| ||||
|
| Mode | Rate | Data/Stop | Handshaking | Save | |
|
| TERMINAL | 9600 | 8 | 1 | XON / XOFF | NO |
Setup |
|
|
|
|
|
| |
Port 1 |
|
|
|
|
|
| |
Port 2 |
|
|
|
|
|
| |
Time |
|
|
|
|
|
|
|
Meters | Events | Statistics Graphics | Setup |
|
|
|
|
Figure 26. Setup Serial Port 1 Screen
A small return arrow (
) appears in the upper right corner of the Setup Port
screen. This arrow is a reminder that you can press the 
pushbutton on the Monitor Panel to toggle the pushbuttons between the menu box and the information area.
If the scroll bar is in the menu box, press the 
pushbutton to toggle to the information area. The first setting (Mode) is highlighted. Press the 
or 
pushbutton to move the highlight to the setting you want to change. To scroll through the available options for that setting, press the 
or 
pushbutton.
To save the settings upon exit from this screen, be sure the Save field is set to YES.
Powerware 9315 (200 kVA | 43 |
164201036 Rev. D 041500 |
|