Output Transformer
An optional 480/208 VAC output auto transformer provides a 208 VAC output for applications that require 208 VAC. The transformer is contained in a separate cabinet.
Modem
An optional modem is available for use with the UPS Remote Notification feature described in Chapter 8, “Remote Notification”. Refer to the manual supplied with the modem for modem operating instructions.
Customer Convenience Outlet
An uninterruptible 120VAC, 0.2 amp,
Safety Considerations
The UPS enclosures are designed for industrial or computer room applications, and contain safety shields behind the doors. However, the UPS is a sophisticated power system and should be handled with appropriate care, following these guidelines:
·Keep surroundings clean and free from excess moisture.
·Do not operate the UPS close to gas or electric heat sources.
·The system is not intended for outdoor use.
·The UPS operating environment should be maintained within the parameters stated in this manual.
·Keep the UPS doors closed to ensure proper cooling airflow and to protect personnel from dangerous voltages inside the unit.
·The UPS contains its own power source. Lethal voltages are present even when the UPS is disconnected from utility power.
WARNING:
Only AUTHORIZED SERVICE PERSONNEL should perform service or maintenance on the UPS or battery.
If service or routine UPS maintenance is required:
·Ensure all power is disconnected before performing installation or service.
·Ensure the area around the UPS system is clean and uncluttered.
·Battery cabinet maintenance or battery replacement should be performed only by authorized service personnel.
·Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of the equipment.
·Always conform to the more detailed safety precautions described in “Important Safety Instructions” section of Chapter 9.
Powerware 9315 (200 kVA | 7 |
164201036 Rev. D 041500 |
|