Omega Speaker Systems LCIC-WIM-BEN manual Get a single reading

			c. Get a single reading of:
			weight, A/D or temperature:
.			Get weight (after Filter2, not rounded to resolution).
?			Get weight (after Filter2, rounded to resolution).
>			Get A/D reading after Filter1.
<			Get A/D reading after Filter2.
	T		Get temperature
	d. Analog output: Read & write voltage:
@			Gets the analog output voltage (in Volts).
	vx<c/r>		Sets the analog output voltage to x Volts.
			The analog output voltage is measured at pin 12 of CONN6
	(lower case v)
			with respect to pin 13 which is ground.
		e. Digital Outputs: Write outputs:
	a		Turn on Output1 if Manual
	A		Turn off Output1 if Manual
	b		Turn on Output2 if Manual
	B		Turn off Output2 if Manual
	c		Turn on Output3 if Manual
	C		Turn off Output3 if Manual
	d		Turn on Output4 if Manual
	D		Turn off Output4 if Manual
		f. Digital Outputs: Read outputs:
	O		Card returns a string of the form ‘xxxx<c/r>’, where x is
			either “1” or “0” representing the status of the 4 output
	(upper case o)
			opto relays OUT4,OUT3,OUT2,OUT1 respectively.
	g. Digital Inputs: Read inputs & toggling counter:
	I		Card returns a string of the form 'xxxx<c/r>’, where x is
			either “1” or “0” representing the digital input status of
	(upper case i)
			IN4,IN3,IN2,IN1 respectively.
	i		Gets a 16 bit ‘toggling counter’. The ‘toggling counter’
			increments each time when input #2 is toggled.

30