Omega Speaker Systems LCIC-WIM-BEN Parameters, Parameter Parameter Description Data Number Type

4.2 Parameters

Parameter	Parameter Description			Data
number				Type
1	Load Cell mV/V (1, 2 or 3. 0 = unknown).			Float
2	Units: 0=g, 1=kg, 2=ton, 3=oz, 4=lb.			Float
3	Full Load Cell(s) Capacity			Float
4	Maximum Applied Capacity			Float
5	Resolution Index (0-17)
	Resolution Index is actually the index to an array of 18
	defined values(0-17) like that:
	0.0001,	0.0002, 0.0005,
	0.001,	0.002,	0.005,
	0.01,	0.02,	0.05,	Float
	0.1,	0.2,	0.5,
	1,	2,	5,
	10,	20,	50.
	E.g., if Resolution Index=8, then system resolution =
			0.05.
8	Calibration Date formatted as "MMDDYY".			Float
	So, 10107 <= Calibration Date <= 123199.
11	Calibration Time formatted as "HHMM".			Float
	So, 0 <= Calibration Time <=2359
20	Auto transmit interval (3-52734, integer).
	How many internal adc updates (52734 Hz) there are
	between auto transmissions.
	This gives a theoretical reading rate from 17578 per
	sec to 1 per sec. (i.e. rate=52734/P20). Practically, the
	actual rate for low values of P20 is usually less than			Float
	the theoretical rate. (“P20” stands for “Parameter
	#20”.) Note that this rate relates to USB
	communication; upon using a serial port, the rate is far
	smaller.
	Becomes effective only after a system reset (either
	power off/on or using the ‘S’ command).

34