Omega Speaker Systems LCIC-WIM-BEN Variables Table, Category Variable Name Description Get Set

Variables Table

Category	Variable Name		Description	Get	Set
	Calibration_Name	Name of calibration		V
	Calibration_Date	Calibration date (MMDDYY).		V
	Calibration_Time	Calibration time		V
		(HHMM, e.g., 1545).
	Unit		Weighing unit:	V
		ton, kg, g, lb or oz.
		Weighing resolution:
		0.0001, 0.0002, 0.0005, 0.001,
Calibration		0.002, 0.005,
	Resolution	0.01, 0.02, 0.05,		V
Info
		0.1, 0.2, 0.5,
		1, 2, 5,
			10, 20 or 50.
	Full_Capacity	Full capacity of the load cell.		V
	Maximum_Load	Maximum applied load on the		V
			load cell.
	Load_Cell_Output	Output of the load cell:		V
			0 = Unknown
		1, 2 or 3 = 1, 2 or 3 mV/V.
		There are two filters. The first filter is
	Filter1	basically a 1st level moving average		V	*
		filter of size Filter1 (2-256). Then
		depending on Decimator (1-1000),
		every Decimator-th result from the 1st
		level filter is put through another
	Filter2	moving average filter of size Filter2		V	*
Filtering		(2-256), which is the second filter.
		* Setting these three variables causes
		a board reset, so it is a slow function.
		Therefore, in order to set all of them
	Decimator	there is one more option: the method		V	*
		Set_Filtering , which works faster
		than three individual activations of
		the Set_Variable method.

39