Omega Speaker Systems LCIC-WIM-BEN manual AnalogOutputM = Manual, 1 = Auto

Variables Table (cont’d)

Category	Variable Name	Description	Get	Set
	Analog_Output_M	0 = Manual, 1 = Auto.	V	V
	ode
		Voltage in the analog output, in
Analog	Analog_Output_	volts (0 – 2.5).
		* The ‘Set’ is relevant only if	V	*
	Level
Output		Analog_Output_Mode is
(The analog		‘Manual’.
		When Analog_Output_Mode =
output		‘Auto’:
voltage is	Auto_Hi_Voltage	The voltage to be supplied for	V	V
measured at		weight=Auto_Hi_Weight
pin 12 of
		(in volts, up to 2.5).
CONN6 with
		When Analog_Output_Mode =
respect to
		‘Auto’:
pin 13 which	Auto_Lo_Weight		V	V
		The weight for which 0V should
is ground.)
		be supplied.
		When Analog_Output_Mode =
		‘Auto’:
	Auto_Hi_Weight	The weight for which maximal	V	V
		voltage (=Auto_Hi_Voltage)
		should be supplied.
	Input_1_Status		V
	Input_2_Status	0 = off, 1 = on.	V
	Input_3_Status		V
	Input_4_Status		V
Digital		Status of all inputs at once:
	Input_A_Status	#4#3#2#1	V
Inputs
		#x = Status of input x:
		0 = off, 1 = on (e.g., 0101).
	Toggling_Counter	A 16 bit counter that	V
		increments when opto input
		#2 is toggled.

41