Appendices
A.I/O & the LED Display
A.1 General Notes about the I/O
A.2 Connecting External Devices to the Inputs
A.3
A.4 The LED Display
B.Scaling the Load Cell Input
C.Load Cell Connections
D.USB, RS232 & RS485
D.1 Communication Parameters
D.2 Baud Rate
D.3 General RS232 Terminal
D.4 Serial Communication & PC Power On/Off
D.5 RS485
E.Fill Mode
E.1 | Introduction |
E.2 | Hardware Inputs |
E.3 | Hardware Outputs |
E.4 | Filling Parameters |
E.4.1 Filling By = Weight | |
E.4.1.1 | Filling by Weight Parameters |
E.4.1.2 | Auto Tare |
E.4.1.3 | Valid Results Limits |
E.4.1.4 | Stabilization Criterion (Tare & Stop) |
E.4.1.5 | Lazy Filling |
E.4.2 Filling By = Time | |
E.4.2.1 | Filling by Time Parameters |
E.4.2.2 | Stabilization Criterion (Stop) |
E.4.3 | Fast Speed Config |
E.4.4 The Filling Configurations Library | |
E.5 | LED Display Notations |
E.6 | Commands |
E.7 | Error Codes |
F.Specifications
F.1 Load Cell Input
F.2 A/D
F.3 Digital Inputs
F.4 Digital & Analog Outputs
F.5 Standard Interfaces
F.6 Software
4