Multi-Tech Systems BA-Series manual Power

MultiModemBA User Guide

Fax Modulations	V.21CH2 FSK at 300 bps, V.27ter DPSK at 4800 and 2400 bps,
	V.29 QAM at 9600 and 7200 bps, V.17 TCM at 14400, 12000, 9600,
	and 7200 bps
Transmit Level	-11dBm (dial-up), -9 or -15 dBm (leased-line); dBm level selectable
	with DIP-Switch #3 in leased line setting
Frequency Stability	±0.01%
Connectors	One DB-25 RS-232C connector; two RJ11 for phone line/telephone
	set; power.
Diagnostics	Power-on Self Test, Local Analog Loop, Local Digital Loop, Remote
	Digital Loop, Back-to-Back Test.
Indicators	LEDs for Transmit Data, Receive Data, Carrier Detect, Speed
	Indicators, Off Hook, Terminal Ready, Error Correction, Fax, and
	Error
Controls	Toggle switches for Voice/Data with Originate or Answer, Power On/
	Off; and DIP Switches for various modem options.
Speaker	Speaker for call progress monitoring
Operating Temperature	0° to 50° C (32° to 120° F)
Power Requirements	115 Volts AC, 60Hz, 0.3amp (2-prong outlet-mounted transformer)
	240V/50Hz optional (International).
Dimensions	6.150" x 9.00" x 1.375"
	15.6 cm x 22.9 cm x 3.5 cm
Weight	1.6 pounds/0.72 Kg (without transformer)
	2.6 pounds/1.18Kg (with transformer)
Limited Warranty	Five Years

1.6Power

Power is supplied through an AC power transformer terminated with a standard two-prong plug. The transformer supplies low voltage AC to the modem, and plugs into any conventional 115 volt AC, 60 Hz, two-prong power outlet (240 volts AC, 50Hz, .3 Amp for International modems). The power transformer supplied with the modem is the only one that should be used. Use of any other transformer could cause damage to the modem. A Power On/Off switch is located on the back of the modem.

10