Appendix C - AT Command Summary
Callback Security/Remote Configuration Command Summary
Command | Description |
#DBn | #DB0 disables Callback Security and answering Yes |
| to the prompt turns off Callback Security and erases |
| stored phone numbers and passwords. Answering |
| No to the prompt aborts the command. |
| #DB1 activates remote and local password security. |
| #DB2 activates remote password security. |
#CBNyyxxxxxx | Callback password with xxxxxx being callback |
| password and yy being the memory location. |
| Callback password xxxxxx must start with a non- |
| numeric character and upper/lower case sensitive. |
| Callback password xxxxxx must be a minimum of 6 |
| and maximum of 10 characters. yy memory |
| locations are from 0 to 29. Must specify P (pulse) or |
| T (tone) dialing in string. |
+ - Dxxxxxx???Nxx | Callback Phone Numbers xxxxxx with the + |
| preceding the phone number indicating the callback |
| modem phone number for the corresponding |
| password at the same memory location. The |
| preceding the phone number enables direct entry |
| when the caller uses the correct password without |
| the callback modem having to return the call. The |
| ??? entry at the end of the phone number |
| represents an extension added to the main phone |
| number. The Nxx is the memory location of the |
| callback phone number and password. |
#Pn | Parity of the prompt messages sent by the callback |
| modem. |
| #P0 is no parity |
| #P1 is odd parity |
| #P2 is even parity |
#RCBNxx | Erases the callback password stored at memory |
| location xx. Memory locations are 0 to 29. |
#RDNxx | Erases the callback phone number stored at |
| memory location xx. Memory locations are 0 to 29. |
93