Liebert manual Specifications, Liebert XDV10 specifications

Specifications

11.0SPECIFICATIONS

Table 5	Liebert XDV10 specifications
		XDV10BK--*; XDV10DK--*		XDV10BT--*; XDV10DT--*		XDV10BS--*; XDV10DS--*
		XDV10BKP-*; XDV10DKP-*		XDV10BTP-*; XDV10DTP-*		XDV10BSP-*; XDV10DSP-*
		XDV10BK-E*; XDV10DK-E*		XDV10BT-E*; XDV10DT-E*		XDV10BS-E*; XDV10DS-E*
		XDV10BKPE*; XDV10DKPE*		XDV10BTPE*; XDV10DTPE*		XDV10BSPE*; XDV10DSPE*
		XDV10BKR-*; XDV10BKRE*		XDV10BTR-*; XDV10BTRE*		XDV10BSR-*; XDV10BSRE*
		XDV10DKR-*; XDV10DKRE*		XDV10DTR-*; XDV10DTRE*		XDV10DSR-*; XDV10DSRE*
	Models	60 Hz		60 Hz	50 Hz	50 Hz
Cooling Capacity		Nominal (98ºF [37ºC] EAT): 10kW / 2.8 Tons			Nominal (98ºF [37ºC] EAT): 8kW / 2.3 Tons
		Maximum (106ºF [41ºC] EAT): 11.8kW/3.4 Tons			Maximum (116ºF [47ºC] EAT): 11.8kW/3.4 Tons
Conditions		Capacity Rating is @ 55ºF (13ºC) Entering Fluid Temperature and
		50ºF (10ºC) or lower dew point, rear air inlet.
Electrical Requirements
	Input	120V model: 1ph-60 Hz		230V model:	230V model: 1ph-50 Hz
				1ph-60 Hz
Input power connections			2 power connections, each model
	Full Load Amps	120V model: 2.0A			230V model: 1.0A
Power consumption,		180		190	190	190
	nominal, watts
Dimensions, inches (mm)
	Height – unit only	14 (355) not including pipe connections
Height – including hard			18-5/8 (473)
	pipe connections
Height – including one-			19-5/8 (498)
	shot connections
	Width		22-7/8 (581)
	Depth – Top		39-1/2 (1003)
	Depth – Bottom		29-5/8 (752)
Weight, lb (kg)
	Unit only		77 (35)
	Shipping weight		125 (57)
Installed, with refrigerant			79 (36)
Number of fans		2		2	2	2
Airflow, Nominal,		1000 (1699) with rear inlet. Bottom inlet airflow			833 (1415) with rear inlet. Bottom inlet airflow
		may be less, depending on restrictions inside			may be less, depending on restrictions inside
ft3/ min (m3/ hr)
		cabinet				cabinet
Audible noise		78 dBa sound power			73 dBa sound power
Pipe Connections (without Liebert Flex Pipe)
	Refrigerant supply	1/2" OD, Cu, (optional 1/2" threaded coupler flex piping)
from Liebert XDP/ XDC
	Refrigerant return	5/8" OD, Cu, (optional 3/4" threaded coupler flex piping)
to Liebert XDP/ XDC
Serviceable Parts				Fans and electrical components
Cabinet Exterior Finish		Black, matte finish, heat-fused powder coat
Options
Condensate sensing				Dry contact outgoing signal
	(factory-installed)
Pre-Charged Refrigerant		R-134a Refrigerant, one-shot connections
Agency
	Approvals	CSA 60Hz			CSA 50Hz	CE 50Hz
* = Revision level of unit

38