GE 68K System manual Test Invoke Test Tool, Txxx

68K System Monitor

GE Energy ServicesUser's Guide

TEST - Invoke Test Tool

Platform	o	CPM	D20	D20 ME	D20/200	D20/200 ME	þ	D25
			o D20 Base	o D20 Base	o CCU Base	þ CCU Base
Description	Use this command to activate a test tool external to the monitor.

To use a test tool, the test tool application must:

•be included in the software for the system, and

•be created specifically to make use of this monitor function.

The 68K Monitor relinquishes communications control to the test tool and waits for the tool to complete its processing before continuing.

Syntax	Below is usage and syntax information for this command
	Command Format	test proc_name
	Variables	None
	Parameters	proc_name = The name of the test tool process, normally
		Txxx.
	Example	None Required
	Special	If the test tool application is suspended, the command will not
	Considerations	function.
		The monitor must detect that the test tool is waiting for a signal
		before it will proceed.

SWM0023 1.00 2 General

3-78 Full Release