GE 68K System manual RB Resume Breakpoint

	68K System Monitor
GE Energy Services	User's Guide

RB - Resume Breakpoint

Platform

Description

þ CPM þ D20	o D20 ME	o D20/200	þ D20/200 ME	þ D25
D20 Base	D20 Base	CCU Base	CCU Base

Use this command to restart a process that stopped at a breakpoint, without removing the breakpoint.

It verifies the specified breakpoint, restarts the associated process, and then reinserts the breakpoint trap.

Syntax	Below is usage and syntax information for this command
	Command Format	rb break_pt# [#reps]
	Variables	None
	Parameters	break_pt#	=	breakpoint number as returned with the define
				breakpoint command.
		#reps	=	number of times (in decimal) to repeat
				execution of the breakpoint address before
				stopping; default is zero.
	Example	Type rb 1 and press ENTER.
		This resumes breakpoint number one (1) that stops again
		before the second execution of the instruction at the breakpoint
		address.
		Results: The system responds with the prompt. Whenever it
		encounters a breakpoint, the system displays the
		breakpoint number, loop count, and register values.
		If the loop count is greater than zero, it is
		decremented. Otherwise, the process is suspended.
	Special	None
	Considerations

SWM0023 1.00 2 General

3-56 Full Release