GE 68K System manual SB Step Breakpoint

68K System Monitor

GE Energy ServicesUser's Guide

SB - Step Breakpoint

Platform	þ	CPM	D20	D20 ME		D20/200	D20/200 ME	þ	D25
			þ D20 Base o D20 Base			o CCU Base	þ CCU Base
Description	Use this command to single step a process that was suspended at a breakpoint.
	It also allows executing multiple program steps in a single command.
Syntax	Below is usage and syntax information for this command
	Command Format			sb break_pt# [#instructions]
	Variables			None
	Parameters			break_pt# =	breakpoint number as returned with the define
					breakpoint command.
				#instructions =	number of additional instructions to execute
					prior to stopping; default is zero.
	Example			Type sb 2 1 and press ENTER.
				This allows the process defined by the breakpoint number of 2
				to perform two program instructions.
				Results: The system responds with the prompt. Additionally,
				each time it completes a program step, the system
				displays the breakpoint number, instruction count,
				and register values. If the instruction count is greater
				than zero, it is decremented. Otherwise, the process is
				suspended.
	Special			None
	Considerations

SWM0023 1.00 2 General

3-68 Full Release