GE 68K System manual Type tr /r 20 /t0 10 208000 = 12345678 and press Enter

	68K System Monitor
GE Energy Services	User's Guide

TR - Trace, Continued

Syntax (continued)

Example 1	Type tr /r 20 /t0 10 208000 = 12345678 and press ENTER.
	Results: This will allocate a buffer for 20 samples and
	triggers when the long memory location becomes
	12345678. It saves 10 samples before the trigger, the
	trigger sample and 9 samples more to fill the buffer.
Example 2	Type tr /r 20 /t0 10 208000 change and press ENTER.
	Results: This triggers if the long memory location changes
	value.
Example 3	Type tr /r 20 /t0 10 208000 != 12345678 and press ENTER.
	Results: This triggers if long memory value changes from the
	value 12345678.
Example 4	Type tr /r 20 /t1 10 00123456 and press ENTER.
	Results: This triggers when the RTC value if greater than or
	equal to 00123456.
Example 5	Type tr /r 20 /t2 10 30123456 and press ENTER.
	Results: This triggers after the process with the ID of
	30123456 runs.
Special	This function is only available as a special debug BootROM as
Considerations	there is not enough room for it to be permanently included.
	Currently, the BootROM code must have the TRACE
	command compiled into S043-0 before you can use this
	command. You will have to remove some other commands in
	order to make room for it.

SWM0023 1.00 2 General

3-80 Full Release