GE 68K System manual QX Query Exchange

	68K System Monitor
GE Energy Services	User's Guide

QX - Query Exchange

Platform

Description

þ CPM þ D20	þ D20 ME	þ D20/200	þ D20/200 ME	þ D25
D20 Base	D20 Base	CCU Base	CCU Base

Use this command to display information on system exchanges.

•If you request information on more than one exchange, then the output is in a list format. Each line contains an exchange name and ID, and the number of processes and messages queued.

•If you request information on all exchanges, the monitor derives and displays the number of free exchange control blocks.

•If you request information on a single exchange, then the monitor will display a more detailed description. The description includes the:

−exchange name

−queuing mechanism (FIFO or priority)

−access rights (group only or unlimited), and

−queue length (unlimited or decimal notation limit), followed by a list of: all queued processes, and

all queued messages.

Syntax	Below is usage and syntax information for this command
	Command Format	CPM / D20 / D25:		qx [(xid name)]
		CCU / CCUME:		qx [(xid gxid name)]
	Variables	None
	Parameters	(none)	= displays general information for all exchanges.
		xid	= pSOS exchange ID (in hexadecimal); displays
			detailed information for a specific exchange.
		gxid	= global pSOS exchange ID (in hexadecimal);
			displays detailed information for a specific
			exchange.
		name	= case-sensitive exchange name. It now supports
			the new exchange naming convention.
			If you enter an entire name, the monitor displays
			detailed information for that exchange.
			If you enter the first few characters, the
			command attempts pattern matching. The
			monitor displays general or detailed information,
			depending on the number of matches.
				Continued on next page

SWM0023 1.00 2 General

3-54 Full Release