GE 68K System manual SX Send Exchange, Type sx 304540 1 2 3 4 and press Enter

	68K System Monitor
GE Energy Services	User's Guide

SX - Send Exchange

Platform

Description

Syntax

þ CPM þ D20	þ D20 ME	þ D20/200	þ D20/200 ME	þ D25
D20 Base	D20 Base	CCU Base	CCU Base

Use this command to queue a message at one or more exchanges.

Below is usage and syntax information for this command

Command Format	CPM / D20 / D25:		sx (xid name) m2 m3 m4 m5
	CCU / CCUME:		sx (xid gxid name) m2 m3 m4 m5 [/g]
Variables	/g	= Allows the message to be sent to a queue in a
		different node
Parameters	xid	= pSOS exchange ID (in hexadecimal); send
		message to a specific exchange.
	gxid	= global pSOS exchange ID (in hexadecimal); send
		message to a specific exchange.
	name	= case-sensitive exchange name. The command
		supports the new exchange naming convention.
		If you enter an entire name, the system sends the
		message to that exchange.
		If you enter the first few characters, the
		command attempts pattern matching. The system
		sends the message to one or more exchanges,
		depending on the number of matches.
	m2 - m5	= first through fourth long words in the body of the
		message, in hexadecimal.
Example	Type sx 304540 1 2 3 4 and press ENTER.
	This sends a message identified as 304540. The command sets
	the first two reserved messages to 0.
	Results: The system displays the prompt unless it encounters
		an error. In this case, it displays an error message
		before displaying the prompt.
Special	You must only use this command in a testing or debugging
Considerations	context. If you send a message to an exchange
	indiscriminately, you cannot predict the results.

SWM0023 1.00 2 General

3-76 Full Release