GE 68K System manual CS Check Sum, CCU / Ccume, Message Checksum is and should be

	68K System Monitor
GE Energy Services	User's Guide

CS - Check Sum

Platform

Description

Syntax

þ CPM þ D20	þ D20 ME	þ D20/200	þ D20/200 ME	þ D25
D20 Base	D20 Base	CCU Base	CCU Base

Use this command to perform a checksum or 32-bit CRC of either the boot code area, NVRAM area, or application code area.

Below is usage and syntax information for this command

Command Format	CPM / D20 / D25:			cs / (b n p)
	CCU / CCUME:			cs / (b n p g)
Variables	/b	=	boot code area
	/n	=	NVRAM area
	/p	=	application code area
	/g	=	global NVRAM area
Parameters	None
Example	Type cs /g and press ENTER;
	this performs a check sum of the global NVRAM area.
	Results:	The system responds with the calculated and
		expected checksums of the specified area, and the
		message Checksum is ___ and should be ___.
		A new prompt appears.
Special	Performing cs on flash memory will require 5 to 10 minutes.
Considerations

SWM0023 1.00 2 General

3-18 Full Release