GE 68K System manual SC Select Active Configuration

68K System Monitor

User's Guide GE Energy Services

SC - Select Active Configuration

Platform

Description

o CPM o D20	o D20 ME	þ D20/200	þ D20/200 ME	þ D25
D20 Base	D20 Base	CCU Base	CCU Base

Use this command to select one of the stored configurations as the active configuration.

The system is halted and the stored configuration is uncompressed (if necessary) and written into NVRAM (local on the D25, global on a D200) as the new configuration.

The selected configuration file is marked as the active configuration.

Note:	Upon completion, the Monitor leaves the system halted so that you can
	restart the system with the new configuration.

Syntax	Below is usage and syntax information for this command
	Command Format	sc (file_num file_name) [BaseAddress]
	Variables	None
	Parameters	file_num	=	The query configuration storage parameters
				command displays all existing files, giving
				each a numerical index. The monitor uses this
				index with the command to specify the file
				that it will copy into memory and make
				active.
		file_name	=	The name of the configuration file to select.
				The command will select the first matching
				configuration it finds.
		BaseAddress =		base address at which to write the new
				configuration
	Example	Type sc config.bin and press ENTER.
		Results: The monitor selects the stored configuration
		"config.bin" as the active configuration and copies it
		into NVRAM, overwriting the existing configuration.
	Special	Once this function is invoked, it may take some time for the
	Considerations	configuration to be decompressed (if necessary), and written
		into memory.

General SWM0023-1.00 -2

Full Release 3-69