GE 68K System manual PR Profile, CCU / Ccume / D25

68K System Monitor

User's GuideGE Energy Services

PR - Profile

Platform	þ	CPM	D20	D20 ME	D20/200	D20/200 ME	þ	D25
			þ D20 Base	þ D20 Base	þ CCU Base	þ CCU Base
Description	Use this command to display run-time statistics of all processes in the system,
	including:

•the number of times the process was swapped in

•the number of system real-time clock ticks occurring during its run periods

•the average number of ticks (in tenths of a tick) per run (average)

•the CPU usage (in 10ths of percent) of the process

•the maximum period between watchdog process operations.

	Note:	Each clock tick is one millisecond.
Syntax	Below is usage and syntax information for this command
	Command Format		CPM / D20M		pr / (p r)
			CCU / CCUME / D25		pr / (p r t)
	Variables		/p	= print the process profile
			/r	= reset process profile counts
			/t	= print the process profile in the sequence of CPU
				usage percentage
	Parameters		None
	Example		Type pr /r and press ENTER.
			Results:	The command resets the counts associated with
				process profiling and watchdog run period.
				The system displays any specified data and then
				returns the prompt
					Continued on next page

General SWM0023-1.00 -2

Full Release 3-47