GE 68K System manual Move Memory, Type m 200000 200400 200 and press Enter

68K System Monitor

User's Guide GE Energy Services

M - Move Memory

Platform

Description

þ CPM þ D20	þ D20 ME	þ D20/200	þ D20/200 ME	þ D25
D20 Base	D20 Base	CCU Base	CCU Base

Use this command to copy memory from one memory region to a writeable memory region.

It requires three hexadecimal quantities, which define the:

•source address

•destination address, and

•number of bytes to transfer

Syntax	Below is usage and syntax information for this command
	Command Format	m from_addr to_addr num_bytes
	Variables	None
	Parameters	from_addr	=	start address of the source region in
				hexadecimal
		to_addr	=	start address of the destination in hexadecimal
		num_bytes	=	size in bytes (octets), hexadecimal, of the
				region to move
	Example	Type m 200000 200400 200 and press ENTER.
		Results: This copies the RAM memory region 200000 up to
		200200 to the region 200400 up to 200600.
		The system displays the prompt when it completes
		this instruction.
	Special	An attempt to move to EPROM or non-existent memory will
	Considerations	result in a bus error.
		You can modify systems with FLASH EPROM such as the
		D25 and CCUME using this command.

General SWM0023-1.00 -2

Full Release 3-45