GE 68K System manual RP Resume Process, CCU / Ccume

68K System Monitor

User's Guide GE Energy Services

RP - Resume Process

Platform

Description

þ CPM þ D20	þ D20 ME	þ D20/200	þ D20/200 ME	þ D25
D20 Base	D20 Base	CCU Base	CCU Base

Use this command to restart all processes, some processes, or a specific suspended process.

Use this command to restart processes that have been suspended using the suspend process (SP) command.

Syntax	Below is usage and syntax information for this command
	Command Format	CPM / D20 / D25:		rp [(pid name)]
		CCU / CCUME:		rp [(pid gpid name)]
	Variables	None
	Parameters	(none)	= resume all processes.
		pid	= pSOS process ID (in hexadecimal); resume a
			specific process.
		gpid	= global pSOS process ID (in hexadecimal);
			resume a specific process
		name	= case-sensitive process name. The monitor
			supports the new process naming convention.
			If you enter an entire name, the monitor resumes
			the specified process.
			If you enter the first few characters, the
			command attempts pattern matching. The
			monitor will then resume all matching processes.
	Example	Type rp and press ENTER.
		This enables all suspended processes to resume execution.
		Results: Unless it encounters an error, the system displays the
			prompt. If it encounters an error, the system displays
			an error message before it returns to the prompt.
	Special	Do not use this command to start a D25 after an NVRAM
	Considerations	download or after an error caused it to halt.
		In these cases, you must reboot the D25 to ensure that all
		parameters and variables are re-initialized properly.

General SWM0023-1.00 -2

Full Release 3-57