EXP Computer PCMCIA Ethernet Modem Adapter user manual Consumer Information and FCC Requirements

Page 49

FCC

CONSUMER INFORMATION AND FCC REQUIREMENTS

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual.

In order to program this information into your fax machine, you should complete the following steps:

A. If you modem is ThinFax 1414LX or ThinFax 1414 LXM, and is using MiniFax as your fax software, please use the following procedure. Otherwise skip to (B):

(1)Under your System Manager Menu, select Setup, Option then Date to enter the date and time information.

(2)In your MiniFax Software, go to the Configuration Menu and enter all the information into the menu, then click the OK button. The MiniFax software will generate the required headers on the fax page.

B.If your modem is ThinFax 288i, ThinFax 288c ThinFax 1414i, ThinFax 1414c, ThinFax 1414CL, ThinFax 1414LX , ThinFax 1414LXM, or the modem portion of the ThinCom and is using QuickLink II Fax software

(1)Under your Windows environment, go through Main-Control Panel-Date/Time to enter the date and time information.

(2)Go to the Cover Page Setup section of your QuickLink II Fax software, enter information about you and your company for the fax page headers and click the OK button when all of the information are completed.

The QuickLink II Fax software will generate the required headers on the fax page according to the information entered in the Cover Page Setup. If you need to know more detail about how to use the setup, please consult the Cover Page Setup section of your QuickLink II Fax software Users Guide.

- 45 -

Page 48 Page 50
Image 49
Page 48 Page 50
Contents ThinCom Pcmcia Ethernet Modem Adapter User=s Manual Copyright Table of Contents Register Summary System Requirement IntroductionIntroduction Hardware Installation Guide InstallationInstallation Network Environment Driver selection Installation VerificationInstallation Testing the Network Installation Testing the ModemInstall the Thincom Card Windows 95 InstallationIf Something Goes Wrong Enabling 32-BIT Card Support in Windows Modem Installation VerificationNetwork Installation Data Communication Operation Operating Mode Operating ModeData Communication Remote AccessFile Transferring Cellular OperationFAX Operation FAX OperationPage Diagnostic Function DiagnosticTroubleshooting TroubleshootingNo Dial Tone Appendix a CS.EXE Pcmcs Ctalkcs Basic AT= command for 28,800 Modem Command Function Appendix a Set 10 pps pulse dial with 39%/61% make/break Modem negotiates an error corrected link ECC Comands MNP 10 CommandsCaller ID Commands Enable MNP 10 extended services detection onlyCellular Commands Command Default Function Basic AT= command for 1414 CLConfigured. DTR option Is enabled when DTR is turned onHz guard tone enabled Disabled QAM modulation only42, MNP AT Commands Default Function ATDS=n command = 0, 9, A, B, C, D, #, *, T, P, R, W, @S37000 S90000 S108002 S109062 Range No RetrainEnable Bps rate adjusting Enables V.42 bis only when transmitting data Disables V.42 bisEnables V.42 bis only when receiving data Dial Modifiers Command FunctionCommand Function Return the value of default S register ECC Commands Operating Consideration Function Range Units Register Summary Function Range UnitsFunction Range S33 Xoff Character 255 Appendix B Page FCC Part FCC Compliance StatementsFCC Consumer Information and FCC Requirements Canadian Department of Communications compliance statements Page
Top Page Image Contents