Aiwa NSX-AJ14 operating instructions Setting the Timer, Timer Recording

Page 15

TIMER

SETTING THE TIMER

The unit can be turned on at a specified time every day with the built-in timer.

Preparation

Make sure the clock is set correctly.

1Press one of the function buttons to select a source.

2Press TIMER while pressing SHIFT on the remote

control so that 5 appears on the display.

Time and audio source name flash alternately.

3Within 6 seconds, press for gto designate

the timer-on time, then press a.

Pressing either button changes both the hour and the minute. Holding it down will vary the time rapidly by 10-minute interval, and pressing it repeatedly will vary by 1 minute interval.

6Prepare the source.

To listen to a CD, load the disc to be played first on tray 1. To listen to a tape, insert the tape into deck 1 or 2.

To listen to the radio, select the band and tune in to a station.

7Press POWER to turn off the power.

When the timer-on time is reached, the unit turns on and begins play with the selected source.

8 Get ready for the tape function or the timer recording.

To listen to the tape, press c on deck 1 or 2.

To record the source, press w on deck 1.

When the timer-on time is reached, the unit turns on and begins play with the selected source. While the timer is in operation, the display indication is dimmer than usual.

You can change the source that was selected in step 1 by pressing one of the function buttons before pressing a in step 3.

The timer recording period and tape length

When the length of the tape to be recorded is shorter than the timer recording period, won deck 1 is released before the timer is off.

When the tape length is longer than the timer recording period, w is not released. If w is not released for a long time, the tape in the deck may be damaged. Press Z to release w.

To check the timer setting

Press TIMER while pressing SHIFT on the remote control.

The timer-on time, the selected source, and the duration for the timer-activated period will be displayed for 4 seconds.

To change any of the previous setting

Carry out from step 1.

However, if you do not change the timer-on time, in step 3 just press a twice and continue from step 4.

To cancel the timer standby mode temporarily

Press TIMER repeatedly while pressing SHIFT on the remote control so that 5 disappears.

To restore the timer standby mode, press again to display 5.

Using the unit while the timer is set

You can use the unit normally after setting the timer.

Before turning off the power, check whether the contents in step 5 and 6 are set as you wish, turn off the power and carry out step 8 if necessary.

TIMER RECORDING

En

4Within 4 seconds, press for gto select the

duration for the timer-activated period.

The duration can be set between 5 and 240 minutes in 5 minute steps.

The duration will be automatically set after 4 seconds. It will also be set if a is pressed within 4 seconds after step 4.

5Adjust the volume.

The source sound will play at the volume level set in this step when the power is turned on by the timer.

If the volume level is set to 17 or higher, however, it will automatically be set to 16 when the power is turned on.

•Timer playback and timer recording will not begin unless the power is turned off.

•Connected equipment cannot be turned on and off by the built in timer of this unit. Use an external timer.

•If the timer recording is done with the economizing mode (page 6) set to “ECO ON” or “ECO AUTO” and the power turns off, the dimmer mode will be set to “DIMMER 3” and the volume level will be 0 (minimum level) the next time the power is turned on.

•You can check the timer setting by pressing TIMER while pressing SHIFT on the remote control even while the power is off. In this case, if you press awithin 4 seconds after pressing TIMER while pressing SHIFT on the remote control, you can enter the timer setting mode and change the previous setting.

ENGLISH 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents NSX-AJ14 Precautions InstallationElectric Power Table of Contents Connect the supplied antennas Before connecting the AC cordConnections Connect the right and left speakers to the main unitRemote Control Connecting AN Outdoor AntennaPreparations Setting Power Economizing Mode Dimmer ModeBefore Operation Super T-BASS System Setting the ClockAudio Adjustments VolumePress c to start play Graphic EqualizerBasic Operations Press Tape and press Zto open the cassette holderTapeplayback Manual TuningPresetting Stations Preset Number TuningPlaying Discs Loading DiscsProgrammed Play Random /REPEAT PlayPlaying Basic Recording Insert the tape to be recorded on into deckPress w to start recording AI Edit Recording Press w on deck 1 to start recording on the first SideSecond recording Repeat for the rest of the tracks for side Turn over the tape in deck 1 and press wto start RecordingTo change the program of each side Timer Recording Setting the TimerSetting the Sleep Timer Press VIDEO/AUX Other Connections Other Features TimerVIDEO/AUX Jacks CD Digital OUT Optical JackCassette Deck Section Care and MaintenanceGeneral Tuner SectionCopyright SpecificationsParts Index Energía elé ctrica PrecaucionesAdvertencia Instalació nIndice Antes de conectar el cable de alimentació n de CA Conexiones2Conecte las antenas suministradas Conecte el cable de CA a una toma de CAControl Remoto Conexion DE UNA Antena ExteriorPreparativos Antes DE LA Operacion Activacion DEL Modo DE Ahorro DE EnergiaModo DE Intensidad DE Iluminacion Pulse Clock mientras pulsa Shift Control DE VolumenAjustes DE Audio Sistema Super T-BASSPulse c para iniciar la reproducció n Ecualizador GraficoOperaciones Basicas Pulse Tape y Z para abrir el portacaseteReception DE LA Radio Reproduccion DE Cintas Sonido Sintonizacion ManualPreajuste DE Emisoras Sintonizacion Mediante Numero DE PreajusteReproduccion DE Discos Introduccion DE DiscosPulse Disc Direct Play 1-3 para seleccionar Un disco Grabacion Basica Inserte la cinta que vaya a grabar en la platinaPulse w para iniciar la grabació n Grabacion CON Edicion AI Pulse w de la platina 1 para iniciar la grabació nDe la primera cara Para cambiar el programa de cada cara Para iniciar la grabació nPrepare la fuente Ajuste el volumenPulse Power para desconectar la alimentació n Ajuste DEL TemporizadorPara cancelar el temporizador para dormir Para disfrutar del juegoPara reiniciar el juego Haga la reproducció n en el equipo conectado Tomas VIDEO/AUXToma CD Digital OUT Optical Pulse VIDEO/AUXSeccion DE LA Platina Cuidados Y MantenimientoGeneralidades Seccion DEL SintonizadorDerechos DE Autor EspecificacionesSignification des symboles graphiques AvertissementEnergie é lectrique Table DES Matieres Avant de brancher le cordon secteur ConnexionsConnecter les antennes fournies Brancher le cordon secteur à une prise de courantConnexion D’UNE Antenne Exterieure TelecommandeAppuyer sur ECO Mise EN Service DU Mode Economie D’ENERGIEPour dé sactiver ou activer le mode Demo Avant L’UTILISATIONAppuyer sur Clock tout en appuyant sur Shift Reglage DE L’HORLOGEReglages Audio Systeme Super T-BASSAppuyer sur c pour dé marrer la lecture Egaliseur Graphique Operations DE BaseSON Decassettes Accord ManuelMemorisation DE Stations Accord SUR UNE Station MemoriseePour vé rifier le temps restant Sé lection d’une plage avec la té lé commandeMise EN Place DE Disques Lecture DE DisquesLecture Programmee Lecture ALEATOIRE/REPETEEShift Enregistrement DE Base Insé rer la cassette à enregistrer dans la platineAppuyer sur w pour dé marrer l’enregistrement Duré e des cassettes et temps du montage Sur Shift de la té lé commande pour afficher lePour arrê ter l’enregistrement Pour effacer le programme du montagePour changer le programme de chaque face Ré pé ter l’é tape 5 pour le reste des plages de la Face aFace ’enregistrementPré parer la source Ré gler le volumeAppuyer sur Power pour mettre l’appareil hors Tension Reglage DE LA MinuteriePour dé sactiver la dé monstration ou le jeu, appuyer sur a Pour annuler la minuterie d’arrê tUtilisation du jeu demo Pour ré initialiser le jeu demoAppuyer sur VIDEO/AUX Prises VIDEO/AUXPrise CD Digital OUT Optical CaracteristquesPartie Magnetocassette Soins ET EntretienGeneralites Partie TunerDroits D’AUTEUR

NSX-AJ14 specifications

The Aiwa NSX-AJ14 is a compact stereo system that epitomizes the brand's commitment to delivering high-quality sound and user-friendly technology. Known for its stylish design and impressive audio capabilities, the NSX-AJ14 became popular in homes and offices during its peak.

One of the key features of the Aiwa NSX-AJ14 is its dual cassette deck, which provides the convenience of recording from various sources. The system supports both normal and metal tapes, showcasing versatility and catering to different audio preferences. The high-speed dubbing function allows users to create copies quickly, making it an excellent choice for music enthusiasts who want to preserve their favorite tracks.

The NSX-AJ14 is also equipped with a built-in CD player, supporting standard audio CDs and CD-Rs. The system features a digital display that provides clear visuals of the track being played, enhancing the user experience. With its programmable playback feature, listeners can arrange their favorite tracks in a customized order.

Another notable aspect is its powerful amplifier, capable of delivering an impressive sound output. The speakers are designed to produce deep bass and clear treble, providing a balanced audio profile that satisfies even the most discerning listeners. The NSX-AJ14 can fill a room with crisp sound, making it ideal for parties or casual listening sessions.

In addition to its playback features, the Aiwa NSX-AJ14 also integrates FM/AM radio, allowing users to enjoy their favorite radio stations. The system includes a digital tuner, which delivers precise tuning and reduces interference, ensuring a consistent listening experience.

Portability is another strong point of the NSX-AJ14. Its compact design means it can fit comfortably on a shelf or desk, yet it doesn’t compromise on performance. Users appreciate its straightforward control layout, which makes adjustments and settings quick and intuitive.

Overall, the Aiwa NSX-AJ14 stands as a versatile stereo system combining quality sound, practical features, and a sleek design. Its dual cassette deck, built-in CD player, FM/AM radio, and powerful sound output position it as an attractive option for those seeking an all-in-one audio solution for their music needs. Whether for personal enjoyment or as a centerpiece for gatherings, the Aiwa NSX-AJ14 offers an enjoyable auditory experience that has left a lasting impression on its users.
Top Page Image Contents