Actiontec electronic 56K V.90 manual Table of Contents

Table of Contents
Proprietary Notice and Disclaimer	1
Introduction	9
Contacting Actiontec Customer Support	2
Do This First	3
For Windows 95 and Windows 98 Installations	3
For Windows NT 4.0 Installation	4
For Windows 2000 Professional Installation	5
Installing The Modem	6
Hardware Installation	6
Connecting Devices to the Modem	8
Configuring Windows 95	9
Configuring Windows 95B	11
Configuring Windows 98	13
Configuring Windows NT 4.0	18
Configuring Windows 2000 Professional	22
Installing Communications Software	29
The Modem’s Voice Features	29
Troubleshooting	31
Windows 95/95B/98	31
Windows NT 4.0	34
Common Problems	35
Uninstalling the Modem	37
AT Command Set	40
AT Commands	40
AT Commands for Testing and Debugging	64
S-Registers Reference	67
Notices	77

Proprietary Notice and Disclaimer

Unless otherwise noted, this document and the information herein disclosed are proprietary to Action- tec Electronics, Inc. Any person or entity to whom this document is furnished or who otherwise has possession thereof, by acceptance agrees that it will not be copied or reproduced in whole or in part, nor used in any manner except to meet the purposes for which it was delivered.

The information in this document is subject to change without notice and should not be construed as a commitment by Actiontec. Although Actiontec will make every effort to inform users of substantive errors, Actiontec disclaims all liability for any loss or damage resulting from the use of this document or any hardware or software described herein, including without limitation contingent, special or inciden- tal liability.

Note: PC is a trademark of IBM Corporation. Windows 95 and Windows NT are trademarks of Microsoft, Inc. K56flex is a trademark of Lucent Technologies, Inc. and Rockwell International

1