Actiontec electronic 56K V.90 manual Return On-line to Data Mode, Select Pulse Dialing

On		Return On-line to Data Mode
	Command		Effect
	O0		Instructs the modem to exit on-line command mode and
			return to data mode (see AT Escape Sequence, +++).
	O1		This command issues a retrain before returning to on-
			line data mode.
	O3		This command issues a rate renegotiation before
			returning to online data mode.
Result Codes:
	OK	n = 0, 1, 3
	ERROR	Otherwise
P		Select Pulse Dialing

This command configures the modem for pulse (non-touch-tone) dialing. Dialed digits are pulsed until a T command or dial modifier is received. Tone dial is the default setting.

Qn Result Code Control

Result codes are informational messages sent from the modem and displayed on your monitor. Basic result codes are OK, CONNECT, RING, NO CARRIER, and ER- ROR. The ATQ command allows the user to turn result codes on or off.

Command	Effect
Q0	Enables modem to send result codes to the computer
	(default).
Q1	Disables modem from sending result codes to the
	computer.

Result Codes:

OK n = 0, 1

ERROR Otherwise

46