Actiontec electronic 56K V.90 manual This Command is effective only for use in Japan

Result Codes:

OK	n = 0
ERROR	Otherwise

&Pn Pulse Dial Make-to-Break Ratio Selection

This Command is effective only for use in Japan.

	Command		Effect
	&P0		39/61 make/break ratio, 10PPS
	&PI		33/67 make/break ratio, 10PPS (default)
	&P2		33/67 make/break ratio, 20PPS
Result Codes:
	OK	n = 0, 1, 2
	ERROR	Otherwise
&Qn		Asynchronous Communications Mode
	Command		Effect
	&Q0		Asynchronous Mode, buffered. Same as \N0.
	&Q1		Reserved.
	&Q2		Reserved.
	&Q3		Reserved.
	&Q4		Reserved.
	&Q5		Error Control Mode, buffered (default). Same as \N3.
	&Q6		Asynchronous Mode, buffered. Same as \N0.
	&Q7		Reserved.
			MNP error control mode. If an MNP error control
	&Q8		protocol is not established, the modem will fallback
			according to the current user setting in S36.
			V.42 or MNP error control mode. If neither error control
	&Q9		protocol is established, the modem will fallback
			according to the current user setting in S36.

53