Aiwa XH-A1000 manual Presetting Stations, Preset Number Tuning, Repeat steps 1, Reception, Radio

PRESETTING STATIONS

TUNER/

BAND

TUNER/

BAND

f,g a

a f,g

The unit can store a total of 32 preset stations for all bands. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly.

1Press TUNER/BAND to select a band, and tune in to a station with fDOWN or gUP.

2Press aSET to store the station.

A preset number beginning from 1 in consecutive order for each band is assigned to a preset station.

Frequency

3Repeat steps 1 and 2.

No more stations will be stored if a total of 32 preset stations have already been stored.

NOTE

•When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

•“FULL” is displayed if you attempt to store more than 32 preset stations.

PRESET NUMBER TUNING		RECEPTION
Use the remote control to select the preset number directly.
TUNER/	TUNER/	RADIO
BAND
TUNER	BAND
	0-9,+10
PRESET
MULTI	c/d
JOG
a	s
s
	a
d

1Press TUNER/BAND to select a band.

2Press numbered buttons 0-9 and +10 to select a

preset number.

Example:

To select preset number 20, press +10, +10 and 0.

To select preset number 15, press +10 and 5.

Selecting a preset number on the main unit

Press TUNER/BAND to select a band.

Press TUNER PRESET repeatedly until the preset number flashes (preset tuning mode), and turn MULTI JOG. The preset En numbers are selected in sequence as you turn MULTI JOG.

•dPRESET is also available to select the preset number. Each time the button is pressed, the next highest number is selected.

To clear a preset station

Select the preset number of the station to be cleared with the numbered buttons. Then, press sCLEAR, and press aSET within 4 seconds.

The preset numbers of all other stations in the band with higher numbers are decreased by one.

ENGLISH 15