Sony CPD-G200 manual Additional settings Option, Degaussing the screen, Adjusting the moire

Page 11

Additional settings (OPTION)

You can manually degauss (demagnetize) the monitor, adjust the moire cancellation level, change the menu position, and lock the controls.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight OPTION and press the center of the control button again.

The OPTION menu appears on the screen.

3Move the control button m/M to select the desired adjustment item.

Adjust the selected item according to the following instructions.

Degaussing the screen

The monitor is automatically demagnetized (degaussed) when the power is turned on.

To manually degauss the monitor, first move the control button m/Mto select (DEGAUSS). Then move the control button ,.

The screen is degaussed for about 5 seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.

Adjusting the moire*

If elliptical or wavy patterns appear on the screen, adjust the moire cancellation level.

To adjust the amount of moire cancellation, first move

the control button m/M to select (MOIRE ADJUST). Then move the control button </, until the moire effect is at a minimum.

*Moire is a type of natural interference which produces soft, wavy lines on your screen. It may appear due to interference between the pattern of the picture on the screen and the phosphor pitch pattern of the monitor.

Example of moire

Changing the menu’s position

Change the menu’s position if it is blocking an image on the screen.

To change the menu’s on-screen position, first move

the control button m/M to select (OSD H POSITION)

for horizontal adjustment, or (OSD V POSITION) for vertical adjustment. Then move the control button </, to shift the on-screen menu.

Locking the controls

To protect adjustment data by locking the controls, first

move the control button m/M to select (CONTROL LOCK). Then move the control button ,, to select ON.

Only the 1 (power) switch, EXIT, and (CONTROL LOCK)

of the OPTION menu will operate. If any other items are

selected, the mark appears on the screen.

To cancel the control lock

Repeat the procedure above and set (CONTROL LOCK) to OFF.

US

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Trinitron Color Computer Display Hinweise ImportanteTable of Contents Transportation PrecautionsInstallation MaintenanceRear Identifying parts and controlsFront Connecting to a Macintosh or compatible computer SetupConnect the power cord Connecting to an IBM PC/AT or compatible ComputerPress the center of the control button Turn on the monitor and computerSelecting the on-screen menu language Lang If no picture appears on your screenNavigating the menu Displaying the current input signalCustomizing Your Monitor Using the control button Adjusting the brightness and contrastAdjusting the centering of the picture Center Adjusting the size of the picture SizeEnlarging or reducing the picture Zoom Adjusting the shape of the picture GeomAdjusting the color of the picture Color Adjusting the convergence ConvChanging the menu’s position Additional settings OptionAdjusting the moire Degaussing the screenHelpful hints and information Help Resetting the adjustmentsTroubleshooting Technical FeaturesOscillates, or is scrambled Trouble symptoms and remediesSymptom Check these items No picture Picture flickers, bouncesProperly Symptom Check these items Picture is ghostingPower is turned on Picture is not centered or sizedSelf-diagnosis function SpecificationsIf the 1 power indicator is green If the 1 power indicator is flashing orangeTable des Matières InstallationUtilisation du support pivotant PrécautionsEntretien TransportArrière Identification des composants et des commandesAvant ’alimentation Installation1re étape Raccordez le moniteur à votre ordinateur 2e étapeBranchez le cordonEnglish Anglais Appuyez au centre de la manette de commandeSélection de la langue d’affichage des menus Lang Si aucune image n’apparaît à l’écranPilotage par menus Affichage du signal d’entrée en coursPersonnalisation de votre moniteur Réglage de la taille de l’image Taille Utilisation de la manette de commandeRéglage de la luminosité et du contraste Réglage du centrage de l’image CentreRéglage de la convergence Conv Agrandir ou réduire l’image ZoomRéglage de la forme de l’image Geom Réglage de la couleur de l’image CoulRéglage du moiré Verrouillage des commandesRéglages supplémentaires Option Démagnétisation de l’écranRéinitialisation des réglages Conseils et informations utiles AideFonction d’économie d’énergie Caractéristiques techniquesDépannage Modes présélectionné et utilisateurSymptôme Vérifiez Pas d’image Symptômes et remèdes’image n’est pas centrée ou de Symptôme Vérifiez ’image est floueDes images fantômes ApparaissentSi l’indicateur 1 alimentation clignote en orange Fonction d’autodiagnosticSpécifications Si l’indicateur 1 alimentation est allumé en vertInstalación ÍndicePrecauciones Parte posterior Identificación de los componentes y los controlesParte frontal Conexión a un ordenador IBM PC/AT o compatible InstalaciónPaso 1 Conexión del monitor al ordenador Paso 2 Conexión del cable de alimentaciónPulse el centro del botón de control Paso 3 Encendido del monitor y del ordenadorSelección del idioma de los menús en pantalla Lang Si las imágenes no aparecen en pantallaVisualización de la señal de entrada actual Personalización del monitorNavegación por el menú Uso del botón de control Ajuste del brillo y del contrasteAjuste del centrado de la imagen Centro Ajuste del tamaño de la imagen TamañoAjuste de la convergencia Conv Ampliación o reducción de la imagen ZoomAjuste de la forma de la imagen Geom Ajuste del color de la imagen ColorBloqueo de los controles Desmagnetización de la pantallaAjuste del muaré Cambio de la posición del menúRestauración de los ajustes Sugerencias e información útiles AyudaCaracterísticas técnicas Solución de problemasOscila o aparece codificada Problemas y solucionesProblema Compruebe lo siguiente Ausencia de imagen La imagen parpadea, se ondulaLos bordes de la imagen aparecen Problema Compruebe lo siguiente Aparecen imágenes fantasmaLa imagen aparece descentrada o Con un tamaño incorrectoSi el indicador 1 alimentación parpadea en naranja EspecificacionesFunción de autodiagnóstico Si el indicador 1 alimentación está iluminado en verdeTCO’99 Eco-document Preset mode timing tableAppendix Environmental requirements

CPD-G200 specifications

The Sony CPD-G200 is a notable model in the realm of CRT (cathode ray tube) monitors, recognized for its commitment to image quality and design reliability. Released in the late 1990s, this model quickly became popular among professional graphic designers, gamers, and everyday consumers who appreciated high-resolution displays. One of the standout features of the CPD-G200 is its impressive resolution capability, with support for various resolutions, including 1600 x 1200 at a refresh rate of 85Hz. This quality allows users to experience sharp, detailed images, making it suitable for graphic-intensive applications.

Its 20-inch (51 cm) display size strikes a balance between providing ample screen real estate while maintaining a compact desk footprint. The monitor utilizes Sony's Trinitron technology, which utilizes an aperture grille instead of the shadow mask found in traditional CRT designs. This leads to superior brightness, color accuracy, and overall picture clarity. With a vertical refresh rate range of 48 Hz to 120 Hz, the CPD-G200 is adept at handling both standard desktop tasks and fast-moving video content, ensuring smooth visuals during use.

Another remarkable aspect of the CPD-G200 is its ergonomic design. The user-friendly on-screen display (OSD) allows for easy adjustments of brightness, contrast, and other picture settings, facilitating an optimal viewing experience tailored to individual preferences. The monitor also features tilt and swivel capabilities to enhance user comfort, reducing strain during prolonged usage.

To further enhance its capabilities, the CPD-G200 is equipped with various input options, including standard VGA input, making it compatible with a wide range of computers and devices from the time of its release. Additionally, the monitor was designed with a focus on reduced electromagnetic interference, ensuring a cleaner, flicker-free display that is pleasant on the eyes, crucial for long work sessions.

Overall, the Sony CPD-G200 appeals to users who prioritize exceptional image quality and reliable performance in a CRT monitor. Its combination of advanced technologies and thoughtful design features makes it a noteworthy option for anyone needing a robust display solution in the transitional period before the widespread adoption of LCD technology. Although today’s market has shifted towards flat-screen monitors, the legacy of the CPD-G200 remains significant in the history of display innovation.
Top Page Image Contents