Sony CPD-G200 manual Adjusting the brightness and contrast, Adjusting the size of the picture Size

Page 9

xUsing the control button

1Display the main MENU.

Press the center of the control button to display the main MENU on your screen.

MENU

2Select the menu you want to adjust.

Highlight the desired menu by moving the control button towards the rear to go up (M), towards the front to go down (m), and left (<) or right (,) to move sideways.

FRONT

MENU

MENU

Adjusting the brightness and contrast

Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu.

These settings are stored in memory for all input signals.

1Move the control button in any direction.

The BRIGHTNESS/CONTRAST menu appears on the screen.

BR I GHTNESS / CONTRAS T

2 6

2 6

2Move the control button m/M to adjust the brightness (), and </, to adjust the contrast (6).

The menu automatically disappears after about 3 seconds.

REAR

3Adjust the menu.

Move the control button left (<) or right (,) to make the adjustment.

MENU

4Close the menu.

Press the center of the control button once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds.

MENU

xResetting the adjustments

Press the RESET button. See page 12 for more information on resetting the adjustments.

RESET

Adjusting the centering of the picture (CENTER)

This setting is stored in memory for the current input signal.

US

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3First move the control button m/M to select for horizontal adjustment, or for vertical adjustment. Then move the control button </, to adjust the centering.

Adjusting the size of the picture (SIZE)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button to highlight SIZE and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3First move the control button m/M to select for

horizontal adjustment, or for vertical adjustment. Then move the control button </, to adjust the size.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Trinitron Color Computer Display Hinweise ImportanteTable of Contents Installation PrecautionsMaintenance TransportationIdentifying parts and controls FrontRear Connect the power cord SetupConnecting to an IBM PC/AT or compatible Computer Connecting to a Macintosh or compatible computerSelecting the on-screen menu language Lang Turn on the monitor and computerIf no picture appears on your screen Press the center of the control buttonDisplaying the current input signal Customizing Your MonitorNavigating the menu Adjusting the centering of the picture Center Adjusting the brightness and contrastAdjusting the size of the picture Size Using the control buttonAdjusting the color of the picture Color Adjusting the shape of the picture GeomAdjusting the convergence Conv Enlarging or reducing the picture ZoomAdjusting the moire Additional settings OptionDegaussing the screen Changing the menu’s positionHelpful hints and information Help Resetting the adjustmentsTroubleshooting Technical FeaturesSymptom Check these items No picture Trouble symptoms and remediesPicture flickers, bounces Oscillates, or is scrambledPower is turned on Symptom Check these items Picture is ghostingPicture is not centered or sized ProperlyIf the 1 power indicator is green SpecificationsIf the 1 power indicator is flashing orange Self-diagnosis functionTable des Matières InstallationEntretien PrécautionsTransport Utilisation du support pivotantIdentification des composants et des commandes AvantArrière 1re étape Raccordez le moniteur à votre ordinateur Installation2e étapeBranchez le cordon ’alimentationSélection de la langue d’affichage des menus Lang Appuyez au centre de la manette de commandeSi aucune image n’apparaît à l’écran English AnglaisAffichage du signal d’entrée en cours Personnalisation de votre moniteurPilotage par menus Réglage de la luminosité et du contraste Utilisation de la manette de commandeRéglage du centrage de l’image Centre Réglage de la taille de l’image TailleRéglage de la forme de l’image Geom Agrandir ou réduire l’image ZoomRéglage de la couleur de l’image Coul Réglage de la convergence ConvRéglages supplémentaires Option Verrouillage des commandesDémagnétisation de l’écran Réglage du moiréRéinitialisation des réglages Conseils et informations utiles AideDépannage Caractéristiques techniquesModes présélectionné et utilisateur Fonction d’économie d’énergieSymptôme Vérifiez Pas d’image Symptômes et remèdesDes images fantômes Symptôme Vérifiez ’image est floueApparaissent ’image n’est pas centrée ou deSpécifications Fonction d’autodiagnosticSi l’indicateur 1 alimentation est allumé en vert Si l’indicateur 1 alimentation clignote en orangeInstalación ÍndicePrecauciones Identificación de los componentes y los controles Parte frontalParte posterior Paso 1 Conexión del monitor al ordenador InstalaciónPaso 2 Conexión del cable de alimentación Conexión a un ordenador IBM PC/AT o compatibleSelección del idioma de los menús en pantalla Lang Paso 3 Encendido del monitor y del ordenadorSi las imágenes no aparecen en pantalla Pulse el centro del botón de controlPersonalización del monitor Navegación por el menúVisualización de la señal de entrada actual Ajuste del centrado de la imagen Centro Ajuste del brillo y del contrasteAjuste del tamaño de la imagen Tamaño Uso del botón de controlAjuste de la forma de la imagen Geom Ampliación o reducción de la imagen ZoomAjuste del color de la imagen Color Ajuste de la convergencia ConvAjuste del muaré Desmagnetización de la pantallaCambio de la posición del menú Bloqueo de los controlesRestauración de los ajustes Sugerencias e información útiles AyudaCaracterísticas técnicas Solución de problemasProblema Compruebe lo siguiente Ausencia de imagen Problemas y solucionesLa imagen parpadea, se ondula Oscila o aparece codificadaLa imagen aparece descentrada o Problema Compruebe lo siguiente Aparecen imágenes fantasmaCon un tamaño incorrecto Los bordes de la imagen aparecenFunción de autodiagnóstico EspecificacionesSi el indicador 1 alimentación está iluminado en verde Si el indicador 1 alimentación parpadea en naranjaPreset mode timing table AppendixTCO’99 Eco-document Environmental requirements

CPD-G200 specifications

The Sony CPD-G200 is a notable model in the realm of CRT (cathode ray tube) monitors, recognized for its commitment to image quality and design reliability. Released in the late 1990s, this model quickly became popular among professional graphic designers, gamers, and everyday consumers who appreciated high-resolution displays. One of the standout features of the CPD-G200 is its impressive resolution capability, with support for various resolutions, including 1600 x 1200 at a refresh rate of 85Hz. This quality allows users to experience sharp, detailed images, making it suitable for graphic-intensive applications.

Its 20-inch (51 cm) display size strikes a balance between providing ample screen real estate while maintaining a compact desk footprint. The monitor utilizes Sony's Trinitron technology, which utilizes an aperture grille instead of the shadow mask found in traditional CRT designs. This leads to superior brightness, color accuracy, and overall picture clarity. With a vertical refresh rate range of 48 Hz to 120 Hz, the CPD-G200 is adept at handling both standard desktop tasks and fast-moving video content, ensuring smooth visuals during use.

Another remarkable aspect of the CPD-G200 is its ergonomic design. The user-friendly on-screen display (OSD) allows for easy adjustments of brightness, contrast, and other picture settings, facilitating an optimal viewing experience tailored to individual preferences. The monitor also features tilt and swivel capabilities to enhance user comfort, reducing strain during prolonged usage.

To further enhance its capabilities, the CPD-G200 is equipped with various input options, including standard VGA input, making it compatible with a wide range of computers and devices from the time of its release. Additionally, the monitor was designed with a focus on reduced electromagnetic interference, ensuring a cleaner, flicker-free display that is pleasant on the eyes, crucial for long work sessions.

Overall, the Sony CPD-G200 appeals to users who prioritize exceptional image quality and reliable performance in a CRT monitor. Its combination of advanced technologies and thoughtful design features makes it a noteworthy option for anyone needing a robust display solution in the transitional period before the widespread adoption of LCD technology. Although today’s market has shifted towards flat-screen monitors, the legacy of the CPD-G200 remains significant in the history of display innovation.
Top Page Image Contents