Additional settings
(DEGAUSS/CANCEL MOIRE)
You can manually degauss (demagnetize) the screen, and cancel the moire.
1Press the center of the control button.
The main MENU appears on the screen.
2Move the control button m/M to highlight
DEGAUSS/CANCEL MOIRE and press the center of the control button again.
The DEGAUSS/CANCEL MOIRE menu appears on the screen.
3Move the control button m/M to select the desired adjustment item.
Adjust the selected item according to the following instructions.
Degaussing the screen
The monitor is automatically demagnetized when the power is turned on.
To manually degauss the monitor, first move the control button m/M to select (DEGAUSS). Then move the control button ,.
The screen is degaussed for about 5 seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.
Cancelling the moire*
If elliptical or wavy patterns appear on the screen, adjust the moire cancellation level.
To adjust the amount of moire cancellation, first move
the control button m/M to select (CANCEL MOIRE). Then move the control button </, until the moire effect is at a minimum.
*Moire is a type of natural interference which produces soft, wavy lines on your screen. It may appear due to interference between the pattern of the picture on the screen and the phosphor pitch pattern of the monitor.
Example of moire
Resetting the adjustments (RESET)
This monitor has the following two reset methods. Use the RESET menu to reset the adjustments.
1Press the center of the control button.
The main MENU appears on the screen.
2Move the control button m/M to highlight 0 RESET and press the center fo the control button again.
The RESET menu appears on the screen.
Reset the settings according to the following instructions.
Resetting all of the adjustment data for the current input signal (MODE)
Move the control button <.
The MODE item is selected. All of the adjustment data for the current input signal is reset.
Note that the following items are not reset by this method.
•
•picture’s rotation (page 11)
Resetting all of the adjustment data to factory preset levels (ALL)
Move the control button ,.
The ALL item is selected. All of the adjustment data for the current input signal is reset. All of the adjustment data (except for the USER settings in the COLOR menu) is reset to the factory preset levels.
Note
The monitor’ s buttons will not operate for about 5 seconds when ALL is selected.
12