GuestWorks and DEFINITY ECS Release 9 | Issue 1 |
Hospitality Operations | November 2000 |
Hospitality Operations |
|
Front Desk Operations | 23 |
|
|
Check-In/Check-Out
Use the following procedures to check hotel guests in and out. If your switch has a PMS that supports
Check-In
When a guest checks in and is assigned a room, the room’s status changes to occupied, and the room’s telephone controlled restriction changes to No Restriction.
1.If you are not sure which rooms are available, press the Occupd Rooms button.
■The lamps associated with the rooms already occupied will display on the DXS selector console. Determine an unoccupied room from this information.
2.Press the Check In button.
■
■
The Check In lamp goes on.
The following displays:
CHECK IN - Ext:
3. Enter the room number followed by the # button.
■One of the following displays:
CHECK IN COMPLETE
This indicates that the
INVALID EXTENSION - TRY AGAIN
This indicates that you entered the wrong extension. Press the Check In button to start over.
CHECK IN: ROOM ALREADY OCCUPIED
This indicates that
CHECK IN FAILED
This indicates that something failed with the
■The console returns to the normal operating mode.