Dell 1900 E201F Drac Config, E2020 CPU Config, E2021 Memory, Population, E2022 Post Fail, ## & ##

Table 1-4. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E201F	DRAC Config	Dell remote access controller	Check screen for specific error
		(DRAC) configuration failure.	messages.
			Ensure that DRAC cables and
			connectors are properly seated. If
			problem persists, see your DRAC
			documentation.
E2020	CPU Config	CPU configuration failure.	Check screen for specific error
			messages.
E2021	Memory	Incorrect memory configuration.	Check screen for specific error
	Population	Memory population order	messages. See "Troubleshooting
		incorrect.	System Memory" on page 110.
E2022	POST Fail	General failure after video.	Check screen for specific error
			messages.
E2110	MBE DIMM ## & ##	One of the DIMMs in the set	See "Troubleshooting System
		implicated by "## & ##" has	Memory" on page 110.
		had a memory multi-bit error
		(MBE).
E2111	SBE Log Disable	The system BIOS has disabled	See "Troubleshooting System
	DIMM ##	memory single-bit error (SBE)	Memory" on page 110.
		logging, and will not resume
		logging further SBEs until the
		system is rebooted. "##"
		represents the DIMM implicated
		by the BIOS.
E2112	Mem Spare DIMM	The system BIOS has spared the	See "Troubleshooting System
	##	memory because it has	Memory" on page 110.
		determined that the memory had
		too many errors. "## & ##"
		represents the DIMM pair
		implicated by the BIOS.
E2113	Mem Mirror DIMM	They system BIOS has disabled	See "Troubleshooting System
	## & ##	memory mirroring because it has	Memory" on page 110.
		determined that one half of the

mirror has had too many errors. "## & ##" represents the DIMM pair implicated by the BIOS.

About Your System

21