Dell 1900 owner manual Solving Problems Described by LCD Status Messages, Fully Buffered Dimm FBD

Table 1-4. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E2118	Fatal NB Mem CRC	One of the connections in the	See "Troubleshooting System
		Fully Buffered DIMM (FBD)	Memory" on page 110.
		memory subsystem link on the
		Northbound side has failed.
E2119	Fatal SB Mem CRC	One of the connections in the	See "Troubleshooting System
		FBD memory subsystem link on	Memory" on page 110.
		the Southbound side has failed.
I1910	Intrusion	System cover has been removed.	Information only.
I1911	>3 ERRs Chk Log	LCD overflow message.	Check the SEL for details on the
		A maximum of three error	events.

messages can display sequentially on the LCD. The fourth message displays as the standard overflow message.

I1912	SEL Full	System Event Log is full of
		events, and is unable to log any
		more events.

Clear the log by deleting event entries.

W1228 ROMB Batt < 24hr Warns predictively that the RAID battery has less than 24 hours of charge left.

Replace RAID battery. See "Replacing the SAS RAID Controller Daughter Card Battery" on page 92.

NOTE: For the full name of an abbreviation or acronym used in this table, see the "Glossary" on page 155.

Solving Problems Described by LCD Status Messages

When a single message appears on the status LCD, locate the code in Table 1-4 and perform the suggested corrective action. The code on the LCD can often specify a very precise fault condition that is easily corrected. For example, if the code E0780 MISSING CPU 1 appears, you know that a microprocessor is not installed in socket 1.

In contrast, you might be able to determine the problem if multiple related errors occur. For example, if you receive a series of messages indicating multiple voltage faults, you might determine that the problem is a failing power supply.

22

About Your System