Dell 1900 owner manual Integrated Devices Screen, Serial Communication Screen

Integrated Devices Screen

Table 2-4 lists the options and descriptions for the information fields that appear on the Integrated Devices screen.

Table 2-4. Integrated Devices Screen Options

Option	Description
Integrated SAS Controller	Enables or disables the integrated SAS controller. This option appears only if a SAS
(Enabled default)	controller is installed.
Integrated RAID	Enables or disables the integrated RAID controller. This option appears only if a
Controller	SAS RAID controller is installed.
(Enabled default)
Embedded SATA	Allows the integrated SATA controller to be set to Off or ATA Mode.
(Off default)
IDE CD-ROM Controller	Enables the integrated IDE controller. When set to Auto, each channel of the
(Auto default)	integrated IDE controller is enabled if IDE devices are attached to the channel.
Diskette Controller	Enables or disables the system's diskette drive controller. When Auto is selected,
(Auto default)	the system turns off the controller when necessary to accommodate a controller
	card installed in an expansion slot. You can also configure the drive as Read-Only,
	or Off. When using the Read-Onlysetting, the drive cannot be used to write to a
	disk.
User Accessible USB Ports	Enables or disables the system’s user accessible USB ports. Options are All Ports
(All Ports On default)	On, Only Back Ports On, and All Ports Off.
Embedded Gb NIC	Enables or disables the system's integrated NIC. Options are Enabled without
(Enabled with PXE	PXE, Enabled with PXE, and Disabled. PXE support allows the system to boot
default)	from the network. Changes take effect after the system reboots.
MAC Address	Displays the MAC address for the integrated 10/100/1000 NIC. This field does not
	have user-selectable settings.
TOE Capability	Displays the TCP/IP Offload Engine (TOE) feature status of NIC.

Serial Communication Screen

Table 2-5 lists the options and descriptions for the information fields that appear on the Serial Communication screen.

Table 2-5. Serial Communication Screen Options

Option	Description
Serial Communication	Options are On with Console Redirection via COM2, and Off.
(Off default)

38

Using the System Setup Program