Dell 1900 owner manual Installing System Components

NOTICE: Do not use force to seat the processor. When the processor is positioned correctly, it engages easily into the socket.

cWhen the processor is fully seated in the socket, rotate the socket release lever back down until it snaps into place, securing the processor. See Figure 3-24.

dClose the processor cover. See Figure 3-24.

17Install the heat sink.

a Using a clean lint-free cloth, remove the existing thermal grease from the heat sink.

NOTE: If you did not receive a replacement heat sink, use the heat sink that you removed in step 10.

bRemove the protective sheet from the thermal grease layer on top of the processor. If you receive the processor without the thermal grease pre-applied, open the grease packet included with your processor kit and apply thermal grease evenly to the top of the processor.

cPlace the heat sink onto the processor. See Figure 3-23.

dClose one of the two heat sink retention levers until it locks. See Figure 3-23.

eRepeat for the other heat sink retention lever.

18Reinstall the center fan bracket. See "Replacing the Center Fan Bracket" on page 79.

19Reinstall the fans in the center fan bracket. See "Removing and Installing a Fan" on page 53.

20Close the system. See "Closing the System" on page 48.

21Reconnect the system to the electrical outlet and turn on the system and attached peripherals.

As the system boots, it detects the presence of the new processor and automatically changes the system configuration information in the System Setup program.

22Press <F2> to enter the System Setup program, and check that the processor information matches the new system configuration. See "Using the System Setup Program" on page 33 for instructions about using the System Setup program.

23Run the system diagnostics to verify that the new processor operates correctly. See "Running the System Diagnostics" on page 121 for information about running the diagnostics and troubleshooting processor problems.

Installing System Components

91