Citizen Systems CT-S4000M, CT-S4000L, CT-S4000DCL, CT-S4000DCM Label paper *L, Mark Dimensions

When using “label paper” with CT-S4000L and CT-S4000DCL, refer to the following. Use the following paper or the equivalent paper.

Paper type	Product name
Recommended thermal label paper	150LA-1 from Ricoh,
	GG40/P22/G6B from Ojitac, HD75 from Nippon Paper

a) Label paper *L

	A
C	B
L	D	M
	Full cut
	position
	Paper feeding	H	I
E	direction
F		J	K
	Printable area
G

				Unit: mm
Mark	Item		Dimensions
A	Liner width	58 to 112-10
B	Label width	54 to 108 + 0.5
C	Left edge of label	2	+	0.5
D	Print width	50 to 104
E	Top margin	2	+	1
F	Print length	21 to 296
G	Bottom margin	2	+	1
H	Cut position between labels	1/2 x (Size I)
I	Gap between labels	4 to 30
J	Label length	25 to 300
K	Label pitch	I+J
L	Left margin	2	+	1
M	Right margin	2	+	1

CAUTION!

Pay attention to the following when using Auto Cutter. Otherwise, a cutter lock or a cutter failure may occur.

■Set the cut length of paper to 25 mm or more.

■When using label paper, cut the gap between labels (liner sheet). Do not cut the label paper (tack paper).

■Adusting the paper sensor must be carried when the type of liner is changed.

Label paper cannot be used with the model supporting blackmark (CT-S4000M/CT- S4000DCM).

— 23 —