Muratec F-112 user manual Paper Specifications, Overview, Supported Sizes of Paper

Page 89

Paper Specifications

Overview

Your machine accepts a variety of print materials, such as cut-sheet paper, including up to 100% recycled fiber content paper, envelopes, labels, transparencies and custom-size paper. Properties, such as weight, composition, grain and moisture content, are important factors affecting the machine’s performance and the output quality. Paper that does not meet the guidelines outlined in this user’s guide can cause the following problems:

•Poor print quality

•Increased paper jams

•Premature wear on the machine.

NOTES:

•Some paper may meet all of the guidelines in this guide and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Muratec has no control.

•Before purchasing large quantities of paper, insure the paper meets the requirements specified in this user’s guide.

CAUTION: Using paper that does not meet these specifications may cause problems, requiring repairs. These repairs are not covered by the Muratec warranty or service agreements.

Supported Sizes of Paper

Size (mm/in.)

Weight

Capacity*

Plain paper

• 60 to 90 g/m2 bond (16

 

Letter (215.9 x 279/8.5 x 11)

• 250 sheets of 75 g/m2

A4 (210 x 297/8.27 x 11.69)

to 24 lb) for the paper

bond (20 lb) paper for

Folio (215.9 x 330.2/8.5 x 13)

tray

 

 

 

 

the paper tray

Legal (215.9 x 355.6/8.5 x 14)

• 60 to 163 g/m

2

bond (16

• 1 sheet of paper for the

Executive (184.2 x 266.7/7.25 x 10.5)

 

to 43 lb) for the manual

manual feeder

B5(182 x 257/7.2 x 10)

feeder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Labels

 

 

 

 

Letter (215.9 x 279/8.5 x 11)

120 to 150 g/m2

 

 

A4 (210 x 297/8.27 x 11.69)

 

 

 

1 sheet of paper for the

 

 

 

 

 

 

 

 

manual feeder

Transparencies

 

 

 

 

 

 

 

Letter (215.9 x 279/8.5 x 11)

138 to 146 g/m2

 

 

A4 (210 x 297/8.27 x 11.69)

 

 

 

 

 

 

 

 

 

* Capacity may vary depending on print materials’ weight and thickness, and environmental conditions.

NOTE: You may experience jams when using print materials with a length of less than 127 mm (5 in.). For optimum performance, ensure that you are storing and handling the paper correctly. Please refer to “Paper Storage Environment” on page A.7.

A

SPECIFICATIONS A.5

Page 88 Page 90
Image 89
Page 88 Page 90
Contents Page Page Contents Receiving a Fax Setting the Paper Type and Size for the Manual FeederInput Misfeed Exit Misfeed Changing Setting Options Advanced Fax Setting OptionsPaper Feeding Problems Copying Problems Important Precautions and Safety Information Laser Safety Statement Power Saver Ozone SafetyRecycling Radio Frequency EmissionsFax Branding Canadian Radio Interference RegulationsRinger Equivalence Number ViiiYou should also know that Limited warranty Page Getting Started TAM Lead for UK only UnpackingClearance Space Selecting a LocationFront View Understanding the Component LocationRear View These are the main components of your machineStarts a job Control Panel Functions O P YDocument Output Support Attaching AccessoriesHandset and Handset Cradle Installing the Toner Cartridge You can load approximately 250 sheets Loading PaperChanging the Paper Size in the Paper Tray Wall jack Connecting the Telephone LineTo view your display text in another language, see the next Turning the Machine OnChanging the Display Language Setting the Machine IDEntering Characters Using the Number Keypad Keypad Letters and Numbers Setting the Date and TimeChanging Numbers or Names Inserting a PauseChanging the Clock Mode Setting the Paper Type and SizeSpeaker, Ringer, Key Sound and Alarm Sound Setting SoundsSpeaker Volume You can control the following soundsToll Save Mode Using the Save ModesToner Save Mode Power Save Mode Setting Up the Fax SystemOption Description Available Fax Setup OptionsBasic Functions Loading a Document Preparing a DocumentMode Recommended for Adjusting the Document ResolutionSending a Fax Manually Sending a Fax AutomaticallyConfirming Transmission Redialing the Last NumberAutomatic Redialing To redial the number you last calledLoading Paper for Receiving Faxes About Receiving ModesReceiving Automatically in Ans/Fax Mode Receiving Automatically in Fax ModeReceiving Manually in Tel Mode Receiving Faxes Using the Drpd Mode Receiving Manually Using an Extension TelephoneReceiving Faxes in the Memory Loading Paper for Copying Adjust the guide to the width of the print materialOpen the rear cover to use the rear output slot Line. Press Enter to access the menu itemAfter copying, close the rear cover Use the scroll buttonMaking a Copy Setting Copy OptionsOn the display Press Reduce/Enlarge or the scroll button or untilCustom50-150% displays on the bottom line. Press Enter Setting the Time Out Option Changing the Default SettingsPress Start Copy/Fax to begin copying Collation CopyingPage Storing a Number for Speed Dialing Speed DialingLine and press Enter Setting a Group Dial NumberGroup Dialing Editing Group Dial Numbers Printing a Phonebook List Searching for a Number in the MemorySearching Sequentially through the Memory Searching with a Particular First LetterAdvanced FAX Functions Sending Broadcasting Faxes Sending a Delayed FaxAdvanced FAX Polling a Remote Machine Sending a Priority FaxAdvanced FAX Or until you see the fax job you want to To cancel your selection, press 2 to select NoAdditional Features Bottom line and press Enter Press the scroll button Using Secure Receiving ModePrinting Reports Changing Setting Options Using Advanced Fax SettingsAdvanced Fax Setting Options Printing a ReportRCV Forward Memo Maintenance Clearing the Memory Cleaning Your Machine Adjusting ShadingCleaning the Outside Cleaning the InsideCleaning the Scan Unit Disassemble the white roller as follows Toner Cartridge Storage Maintaining the Toner CartridgeSaving Toner Expected Cartridge LifeReplacing the Toner Cartridge Setting the Notify Toner OptionCleaning the Drum Items Yield Average Consumables and Replacement PartsIgnoring the Toner Empty Message Replacing the ADF Rubber Pad Memo Troubleshooting Exit Misfeed Clearing Document JamsInput Misfeed Message Location of Jam Go to Clearing Paper JamsPaper Tray Fuser Area or Around the Toner Cartridge Paper Exit AreaTips for Avoiding Paper Jams Manual FeederDisplay Meaning Suggested solutions Clearing LCD Error MessagesLocation you tried to use has One-touch or speed dial Dial the number manually usingNo number assigned to it For storing a number, see Paper tray has run out Load paper in the paper tray. SeeCondition Suggested solutions Solving ProblemsPaper Feeding Problems Copying Problems Faxing Problems Specifications Characters x 2 lines General SpecificationsCopier Specifications Facsimile Specifications Size mm/in Weight Capacity Paper SpecificationsOverview Supported Sizes of PaperCategory Specifications Guidelines for Using PaperPaper Specifications Paper Storage Environment Memo Index Page Visit us at
Top Page Image Contents