Muratec F-112 user manual Clearing LCD Error Messages, Display Meaning Suggested solutions

Page 80

Clearing LCD Error Messages

Messages appears on the display to indicate the control panel to indicate the machine’s status or errors. Refer to the following table to understand the message’s meaning and correct the problem, if necessary. Messages and their meanings are listed in alphabetical order.

Display		Meaning	Suggested solutions

Cancel	?	Your machine’s memory is full	To cancel the fax job, press the 1
1:Yes	2:No	during the machine stores the	button to accept “Yes”
		document into the memory.	If you want to send the pages were
			stored, press the 2 button to accept
			“No.” You should send the remaining
			pages later when the memory is
			available.

[Comm. Error]		The machine has a	Ask the sender to try again.
		communication problem.

CRU Fuse Error		The machine has a problem	Please contact a service
		with recognizing the new toner	representative.
		cartridge.

Document Jam		The loaded document has	Clear the document jam. See
		jammed in the ADF (Automatic	page 6.2.
		Document Feeder).

[Door Open]		The front or rear cover is not	Close the cover until it locks into place.
		securely latched.

Group Not		You have tried to select a	Just use a one-touch or speed dial
Available		group location number where	number or dial a number manually
		only a single location number	using the number keypad.
		can be used, such as when
		adding locations for a
		broadcasting operation.

[Incompatible]		The remote machine does not	Reconfirm the remote machine’s
		have the requested feature,	features.
		such as a delayed
		transmission.
		It also occurs if the remote
		machine does not have enough
		memory space to complete the
		operation you are attempting.

[Jam 1] or		The toner cartridge is not	Install the toner cartridge. See
[No Cartridge]		installed.	page 1.8.

Line Busy		The remote person did not	Try again after a few minutes.
		answer or the line is already
		engaged.

[Line Error]		Your machine cannot connect	Try again. If the problem persists, wait
		with the remote machine or	an hour or so for the line to clear and
		has lost contact because of a	try again.
		problem with the phone line.	Or, turn the ECM on. See page 4.5.

6.6TROUBLESHOOTING

Image 80

Contents Page Page Contents Setting the Paper Type and Size for the Manual Feeder Receiving a FaxInput Misfeed Exit Misfeed Changing Setting Options Advanced Fax Setting OptionsPaper Feeding Problems Copying Problems Important Precautions and Safety Information Laser Safety Statement Ozone Safety Power SaverRecycling Radio Frequency EmissionsCanadian Radio Interference Regulations Fax BrandingRinger Equivalence Number ViiiYou should also know that Limited warranty Page Getting Started Unpacking TAM Lead for UK onlySelecting a Location Clearance SpaceUnderstanding the Component Location Front ViewRear View These are the main components of your machineControl Panel Functions O P Y Starts a jobAttaching Accessories Document Output SupportHandset and Handset Cradle Installing the Toner Cartridge Loading Paper You can load approximately 250 sheetsChanging the Paper Size in the Paper Tray Connecting the Telephone Line Wall jackTurning the Machine On To view your display text in another language, see the nextSetting the Machine ID Changing the Display LanguageEntering Characters Using the Number Keypad Setting the Date and Time Keypad Letters and NumbersChanging Numbers or Names Inserting a PauseSetting the Paper Type and Size Changing the Clock ModeSetting Sounds Speaker, Ringer, Key Sound and Alarm SoundSpeaker Volume You can control the following soundsToll Save Mode Using the Save ModesToner Save Mode Setting Up the Fax System Power Save ModeAvailable Fax Setup Options Option DescriptionBasic Functions Preparing a Document Loading a DocumentAdjusting the Document Resolution Mode Recommended forSending a Fax Automatically Sending a Fax ManuallyRedialing the Last Number Confirming TransmissionAutomatic Redialing To redial the number you last calledAbout Receiving Modes Loading Paper for Receiving FaxesReceiving Automatically in Ans/Fax Mode Receiving Automatically in Fax ModeReceiving Manually in Tel Mode Receiving Manually Using an Extension Telephone Receiving Faxes Using the Drpd ModeReceiving Faxes in the Memory Adjust the guide to the width of the print material Loading Paper for CopyingLine. Press Enter to access the menu item Open the rear cover to use the rear output slotAfter copying, close the rear cover Use the scroll buttonSetting Copy Options Making a CopyOn the display Press Reduce/Enlarge or the scroll button or untilCustom50-150% displays on the bottom line. Press Enter Changing the Default Settings Setting the Time Out OptionCollation Copying Press Start Copy/Fax to begin copyingPage Speed Dialing Storing a Number for Speed DialingLine and press Enter Setting a Group Dial NumberGroup Dialing Editing Group Dial Numbers Searching for a Number in the Memory Printing a Phonebook ListSearching Sequentially through the Memory Searching with a Particular First LetterAdvanced FAX Functions Sending a Delayed Fax Sending Broadcasting FaxesAdvanced FAX Sending a Priority Fax Polling a Remote MachineAdvanced FAX To cancel your selection, press 2 to select No Or until you see the fax job you want toAdditional Features Using Secure Receiving Mode Bottom line and press Enter Press the scroll buttonPrinting Reports Using Advanced Fax Settings Changing Setting OptionsAdvanced Fax Setting Options Printing a ReportRCV Forward Memo Maintenance Clearing the Memory Adjusting Shading Cleaning Your MachineCleaning the Outside Cleaning the InsideCleaning the Scan Unit Disassemble the white roller as follows Maintaining the Toner Cartridge Toner Cartridge StorageSaving Toner Expected Cartridge LifeReplacing the Toner Cartridge Setting the Notify Toner OptionCleaning the Drum Items Yield Average Consumables and Replacement PartsIgnoring the Toner Empty Message Replacing the ADF Rubber Pad Memo Troubleshooting Exit Misfeed Clearing Document JamsInput Misfeed Message Location of Jam Go to Clearing Paper JamsPaper Tray Paper Exit Area Fuser Area or Around the Toner CartridgeManual Feeder Tips for Avoiding Paper JamsClearing LCD Error Messages Display Meaning Suggested solutionsOne-touch or speed dial Dial the number manually using Location you tried to use hasNo number assigned to it For storing a number, see Paper tray has run out Load paper in the paper tray. SeeCondition Suggested solutions Solving ProblemsPaper Feeding Problems Copying Problems Faxing Problems Specifications General Specifications Characters x 2 linesCopier Specifications Facsimile Specifications Paper Specifications Size mm/in Weight CapacityOverview Supported Sizes of PaperCategory Specifications Guidelines for Using PaperPaper Specifications Paper Storage Environment Memo Index Page Visit us at