Matrox Electronic Systems PCI G450 Connection setup, HD-15 only only an HD-15 blue Connector

Connection setup

For the purpose of determining your connection setup, there are 4 types of graphics cards:

!HD-15/HD-15 – two HD-15 (blue)

connectors

HD-15 HD-15

!HD-15 only – only an HD-15 (blue)

connector

HD-15

!DVI/HD-15 – a DVI (white) and an HD-15

(blue) connector

DVIHD-15

!DVI only – only a DVI (white) connector

DVI

WARNING: Don’t change monitor connections while your computer is turned on. While your computer is turned on, it may be using monitor settings that are specific to the current monitor connections. Some devices may be permanently damaged if incorrect settings are used.

If your graphics card has two HD-15 (analog) connectors,

simply plug your monitor cables into the connectors on your Matrox card. Make sure each end of the monitor cables are properly connected and fastened.

Main connector

Secondary connector

If you only have one monitor, use this connector.

If your graphics card only has an HD-15 connector, simply plug your monitor cable into the connector on your Matrox card. Make sure each end of the monitor cable is properly connected and fastened.

HD-15 connector

4 Matrox Graphics Card – User Guide