Minolta Pi3505e/PS service manual Handling of the Imaging Cartridge and Print Unit

1076D003

1076D004

C.Soak a small amount of either ethyl alcohol or iso- propyl alcohol into a clean, unused Dust-Free Cot-

ton Pad which has been folded over into quarters. Now, wipe the surface of the PC Drum in one con- tinuous movement from its rear edge to its front edge and off its surface one to two times.

✽Never move the Pad back and forth.

D.Using the SAME face of the Pad, repeat the proce- dure explained in the latter half of step 3 until the entire surface of the PC Drum has been wiped. Always OVERLAP the areas when wiping. Two complete turns of the PC Drum would be appropri- ate for cleaning.

NOTES

•Even when the PC Drum is only locally dirtied, wipe the entire surface.

•Do not expose the PC Drum to direct sunlight. Clean it as quickly as possible even under interior illumination.

•If dirt remains after cleaning, repeat the entire procedure from the beginning one more time.

9. Handling of the Imaging Cartridge and Print Unit

✽Only for Products Employing an Imaging Cartridge and Print Unit.

During Transportation/Storage

•The storage temperature is in the range between –20 °C and +40 °C.

•In summer, avoid leaving the Imaging Cartridge and Print Unit in a car for a long time.

Handling

•Store the Imaging Cartridge and Print Unit in a place that is not exposed to direct sun- light.

Precautionary Information on the PC Drum Inside the Imaging Cartridge and Print Unit.

•Use care not to contaminate the surface of the PC Drum with oil-base solvent, finger- prints, and other foreign matter.

•Do not scratch the surface of the PC Drum.

•Do not attempt to wipe clean the surface of the PC Drum.

P-9