Minolta Pi3505e/PS service manual Properties dialog box, May not be applied

Num-	Symptom	Possible Cause	Remedy	Description
ber
10	The printed	There are limitations	Check the paper
	pages were	on the sizes of paper	size, and check
	not sorted in	that can be sorted in	that the paper is
	a crisscross	a crisscross orienta-	loaded horizon-
	orientation.	tion.	tally and vertically.
		Paper of the same
		size is not loaded
		horizontally and ver-
		tically in separate
		paper drawers.
11	Cover pages	The orientations	Specify the same
	and over-	specified for the	orientations.
	head projec-	paper drawers con-
	tor	taining the cover
	transpar-	pages (or overhead
	ency inter-	projector transparen-
	leaves are	cies) and containing
	not printed	the paper are not the
	correctly.	same.
12	The paper	If booklet binding is	Check if the “Book-	Depending on the Finish-
	size cannot	specified, paper	let Creation” set-	ing setting that is
	be specified.	larger than A4, post-	ting is selected.	selected, the paper size
		cards and enve-		cannot be specified.
		lopes cannot be
		specified.
13	The paper	Depending on the	Specify the paper	The paper size can be
	size is not as	application, the	size by using the	specified both from the
	specified.	paper size specified	Print command in	printer’s Properties dia-
		from the printer’s	the application.	log box and by using the
		Properties dialog		Print command in most
		box is not applied.		applications; however,
				depending on the applica-
				tion, the paper size
				selected from the printer’s
				Properties dialog box
				may not be applied.

T-4