Minolta Pi3505e/PS Problems While Printing from a Computer, Computer printing problems

1.PROBLEMS WHILE PRINTING FROM A COMPUTER

1-1. Computer printing problems

Num-	Symptom	Possible Cause		Remedy	Description
ber
1	The printing	The application	Check the instruc-		Depending on the soft-
	position does	paper and print set-	tion manual for the		ware, if the settings are
	not match	tings are incorrectly	application, and		incorrect, even by a small
	the previ-	specified.	then correctly		amount, the printing posi-
	ously used		specify the set-		tion may be shifted.
	printer.		tings.
		The paper that is	Refer to “Paper		With this unit, paper is fed
		being used does not	Tab” in the Printer		by the friction of rollers.
		meet the specifica-	Controller User		Due to this, there may be
		tions for the printer.	Manual, and then		slight errors in the hori-
			check the paper.		zontal and vertical direc-
					tions. These errors differ
					depending on the paper.
2	Only some of	The binding margin	Check the print
	the pages	is incorrect.	area.
	were printed,
	or the data
	for one page
	was printed
	on two
	pages.
3	The left side	The paper position	•	Correctly load
	of the page is	shifted.		the paper.
	blank. (The		•	Check the mar-
	text is only			gin settings
	printed on			specified in the
	the right side			application.
	of the paper.)
4	Text different	The printer is not set	Specify the appro-
	from the text	to the settings most	priate printer set-
	in the screen	appropriate for the	tings.
	was printed.	computer environ-
		ment.
		The interface cable	Check that the
		is not correctly con-	cable is correctly
		nected.	connected to the
			copier and the
			computer.
		A printer buffer or a	Change the con-
		switch is being used.	nections so that a
			printer buffer and
			switch is not being
			used.

T-1