Minolta Pi3505e Warm Restart, Overview, Warm restart procedure, Warm restart operation

Page 61

2.WARM RESTART

2-1. Overview

•Perform this operation when entering Maintenance Mode and when the touch panel but- tons cannot be used (do not operate correctly) if a malfunction occurs while the machine is running (sending, receiving, copying, etc.).

Pressing this button initializes the unit, but documents stored in the unit's memory and program settings are saved. After the unit is initialized, the specified operations are per- formed on the documents stored in the unit's memory (except with copies and computer printouts).

2-2. Warm restart procedure

•Press the button in the small hole on the side of the control panel.

2-3. Warm restart operation

•The warm restart operation begins when the operation described in 2-2 is performed. At this time, the touch panel goes off.

After approximately 5 seconds, the warm restart operation is completed and the initial screen appears in the touch panel. Then, the specified operations are performed on the documents stored in the unit’s memory.

Control panel

4384S501CA

Press the button in the small hole on the side of the control panel.

T-12

Image 61

Contents Pi3505e Pi3505e/PS Always observe precautions Safety Precautions for Inspection and ServiceUse the specified parts Do not throw toner or the toner bottle into a fireBe careful with the high-voltage parts Do not work with wet handsRestore all parts and harnesses to their original positions Do not touch a high-temperature partPrecautions for Service Jobs Maintain a grounded connection at all timesPrecautions for the Working Environment Precautions for Servicing with Covers and Parts RemovedPrecautions for storing the toner or imaging cartridge ALL Areas Used Batteries PrecautionsGermany VorsichtPrecautions for Service Other PrecautionsPrecautions Before Service How to Use this BookPrecautions for Circuit Inspection Precautions for Dis/ReassemblyHandling of PWBs During Transportation/Storage Handling of Other PartsHandling of the PC Drum Handling of the Imaging Cartridge and Print Unit Page Contents Page General MECHANICAL/ELECTRICAL Page Controller Specificationss SpecificationsIBM PC and Compatible Computers Supporting Client SpecificationsCPU Apple Macintosh Computers Pi3505e/PS onlyClan circuit board Function Overview of Circuit BoardsOverview FunctionsBlock Diagram LED indicatorsCopier has not been turned on LAN is not connected correctlyDIS/REASSEMBLY Adjustment Page Removing parts DISASSEMBLY/REASSEMBLYRemoving the copier covers Remove the reinforcing plate 4 screws Remove the connector bracket 1 screwCN4 Removing the Clan circuit boardCN5 Remove the Clan circuit board Expansion slot 1 CN4 CN3Expansion slot 2 CN5 Removing the expansion hard disk drive CN2 CN1Remove the Compact Flash card Checking the assemblyChecking the operation of the printer controller DISPLAYS/SETTINGS Page Printer controller/Network interface unit Checking Touch Panel DisplaysAssigning the IP Address Controller Network SettingStarting PageScope Light Changing soft switch settings Soft SwitchDisplaying the setting screen from Tech. Rep. Mode Page Specifying Printer Function Soft Switch Settings Soft switch settingsBit Mode Factory Setting 355 Bit HEX20Bit HEX04 Mode Factory SettingBit HEX05 North America Mode Factory Setting 440 Bit HEX12Bit HEX01 Bit HEX80Bit HEX00 Bit 000000 Courier Mode Factory Setting 444 Bit HEX00HEX5C Mode Factory Setting 445 BitHEX3C Mode Factory Setting 449 Bit HEX00Bit HEX30 Bit HEX03 HEXE8HEX8C HEX0FBit HEX23 Page Troubleshooting Page Computer printing problems Problems While Printing from a ComputerNections so that a Printer buffer Switch is not being Used Reduced As overlapping images Drawer, depending on May not be applied Properties dialog boxApplication, the printing Ever, depending onOrientation selected from Printer’s PropertiesCopier to be printed Has priority differs Copies is Specified from Copy by usingCopies are not printed Correctly, refer toOrder to specify booklet Tation, holes cannot be Type and size Overhead projector trans SpecifiedPunched at the top Overhead projector Transparency inter Orientation settings speci Num Symptom Possible Cause Remedy Description Ber CoverSpecify the paper Inter Interleaves or Warm Restart Warm restart procedureOverview Warm restart operation7662-4513-11 Copyright