Minolta Pi3505e/PS Checking Touch Panel Displays, Printer controller/Network interface unit

Page 32

1.CHECKING TOUCH PANEL DISPLAYS

•Check the contents of the touch panel screens as a check after servicing this option.

•If the required options do not appear in the screens, refer to the TROUBLESHOOTING section to correct the problem.

1-1. Printer controller/Network interface unit

Checking that [Printer Settings] appears

1. Press the [Utility] key to display the Utility screen.

[Printer Settings] is displayed.

C4514P735CA

S-1

Image 32

Contents Pi3505e Pi3505e/PS Safety Precautions for Inspection and Service Always observe precautionsDo not throw toner or the toner bottle into a fire Use the specified partsBe careful with the high-voltage parts Do not work with wet handsDo not touch a high-temperature part Restore all parts and harnesses to their original positionsPrecautions for Service Jobs Maintain a grounded connection at all timesPrecautions for storing the toner or imaging cartridge Precautions for Servicing with Covers and Parts RemovedPrecautions for the Working Environment Used Batteries Precautions ALL AreasGermany VorsichtOther Precautions Precautions for ServicePrecautions Before Service How to Use this BookPrecautions for Dis/Reassembly Precautions for Circuit InspectionHandling of PWBs During Transportation/Storage Handling of Other PartsHandling of the PC Drum Handling of the Imaging Cartridge and Print Unit Page Contents Page General MECHANICAL/ELECTRICAL Page Specifications Controller SpecificationssSupporting Client Specifications IBM PC and Compatible ComputersCPU Apple Macintosh Computers Pi3505e/PS onlyFunction Overview of Circuit Boards Clan circuit boardOverview FunctionsLED indicators Block DiagramCopier has not been turned on LAN is not connected correctlyDIS/REASSEMBLY Adjustment Page Removing the copier covers DISASSEMBLY/REASSEMBLYRemoving parts Remove the connector bracket 1 screw Remove the reinforcing plate 4 screwsCN5 Removing the Clan circuit boardCN4 Remove the Clan circuit board Expansion slot 2 CN5 CN3Expansion slot 1 CN4 Removing the expansion hard disk drive CN1 CN2Checking the operation of the printer controller Checking the assemblyRemove the Compact Flash card DISPLAYS/SETTINGS Page Checking Touch Panel Displays Printer controller/Network interface unitStarting PageScope Light Controller Network SettingAssigning the IP Address Displaying the setting screen from Tech. Rep. Mode Soft SwitchChanging soft switch settings Page Soft switch settings Specifying Printer Function Soft Switch SettingsMode Factory Setting 355 Bit HEX20 BitBit HEX05 Mode Factory SettingBit HEX04 Mode Factory Setting 440 Bit HEX12 North AmericaBit HEX00 Bit HEX80Bit HEX01 Mode Factory Setting 444 Bit HEX00 Bit 000000 CourierMode Factory Setting 445 Bit HEX5CBit HEX30 Mode Factory Setting 449 Bit HEX00HEX3C HEXE8 Bit HEX03HEX0F HEX8CBit HEX23 Page Troubleshooting Page Nections so that a Printer buffer Switch is not being Used Problems While Printing from a ComputerComputer printing problems Reduced As overlapping images Drawer, depending on Properties dialog box May not be appliedEver, depending on Application, the printingOrientation selected from Printer’s PropertiesCopier to be printed Copies is Specified from Copy by using Has priority differsCopies are not printed Correctly, refer toOrder to specify booklet Punched at the top Type and size Overhead projector trans SpecifiedTation, holes cannot be Overhead projector Transparency inter Specify the paper Inter Interleaves or Num Symptom Possible Cause Remedy Description Ber CoverOrientation settings speci Warm restart procedure Warm RestartOverview Warm restart operationCopyright 7662-4513-11