Minolta Pi3505e Do not throw toner or the toner bottle into a fire, Use the specified parts

Page 3

WARNING

2.Before starting the procedures, be sure to unplug the power cord.

•This product contains a high-voltage unit and a circuit with a large current capacity that may cause an electric shock or burn.

•The product also contains parts that can jerk suddenly and cause injury.

•If this product uses a laser, laser beam leakage may cause eye damage or blindness.

3.Do not throw toner or the toner bottle into a fire.

•Do not throw toner or the Toner Bottle (Imaging Cartridge, Toner Cartridge) into a fire. Toner expelled from the fire may cause burns.

4.Use the specified parts.

•For replacement parts, always use the genuine parts specified in the manufac- turer’s parts manual. Installing a wrong or unauthorized part could cause dielectric breakdown, overload, or undermine safety devices resulting in possi- ble electric shock or fire.

•Replace a blown electrical fuse or thermal fuse with its corresponding genuine part specified in the manufacturer’s parts manual. Installing a fuse of a different make or rating could lead to a possible fire. If a thermal fuse blows frequently, the temperature control system may have a problem and action must be taken to eliminate the cause of the problem.

5.Handle the power cord with care and never use a multiple outlet.

•Do not break, crush or otherwise damage the power cord. Placing a heavy object on the power cord, or pulling or bending it may damage it, resulting in a possible fire or electric shock.

•Do not use a multiple outlet to which any other appliance or machine is con- nected.

•Be sure the power outlet meets or exceeds the specified capacity.

•Use only the power cord supplied in the package. If a power cord is not sup- plied, only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock.

•Use the power cord supplied in the package only for this machine and NEVER use it for any other product. Failure to observe this precaution could result in a fire or electrical shock.

6.Be careful with the high-voltage parts.

•A part marked with the symbol shown on the left carries a high voltage. Touch- ing it could result in an electric shock or burn. Be sure to unplug the power cord before servicing this part or the parts near it.

7.Do not work with wet hands.

•Do not unplug or plug in the power cord, or perform any kind of service or inspection with wet hands. Doing so could result in an electric shock.

P-2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Pi3505e Pi3505e/PS Always observe precautions Safety Precautions for Inspection and ServiceDo not work with wet hands Do not throw toner or the toner bottle into a fireUse the specified parts Be careful with the high-voltage partsMaintain a grounded connection at all times Do not touch a high-temperature partRestore all parts and harnesses to their original positions Precautions for Service JobsPrecautions for Servicing with Covers and Parts Removed Precautions for the Working EnvironmentPrecautions for storing the toner or imaging cartridge Vorsicht Used Batteries PrecautionsALL Areas GermanyHow to Use this Book Other PrecautionsPrecautions for Service Precautions Before ServiceHandling of Other Parts Precautions for Dis/ReassemblyPrecautions for Circuit Inspection Handling of PWBs During Transportation/StorageHandling of the PC Drum Handling of the Imaging Cartridge and Print Unit Page Contents Page General MECHANICAL/ELECTRICAL Page Controller Specificationss SpecificationsApple Macintosh Computers Pi3505e/PS only Supporting Client SpecificationsIBM PC and Compatible Computers CPUFunctions Function Overview of Circuit BoardsClan circuit board OverviewLAN is not connected correctly LED indicatorsBlock Diagram Copier has not been turned onDIS/REASSEMBLY Adjustment Page DISASSEMBLY/REASSEMBLY Removing partsRemoving the copier covers Remove the reinforcing plate 4 screws Remove the connector bracket 1 screwRemoving the Clan circuit board CN4CN5 Remove the Clan circuit board CN3 Expansion slot 1 CN4Expansion slot 2 CN5 Removing the expansion hard disk drive CN2 CN1Checking the assembly Remove the Compact Flash cardChecking the operation of the printer controller DISPLAYS/SETTINGS Page Printer controller/Network interface unit Checking Touch Panel DisplaysController Network Setting Assigning the IP AddressStarting PageScope Light Soft Switch Changing soft switch settingsDisplaying the setting screen from Tech. Rep. Mode Page Specifying Printer Function Soft Switch Settings Soft switch settingsBit Mode Factory Setting 355 Bit HEX20Mode Factory Setting Bit HEX04Bit HEX05 North America Mode Factory Setting 440 Bit HEX12Bit HEX80 Bit HEX01Bit HEX00 Bit 000000 Courier Mode Factory Setting 444 Bit HEX00HEX5C Mode Factory Setting 445 BitMode Factory Setting 449 Bit HEX00 HEX3CBit HEX30 Bit HEX03 HEXE8HEX8C HEX0FBit HEX23 Page Troubleshooting Page Problems While Printing from a Computer Computer printing problemsNections so that a Printer buffer Switch is not being Used Reduced As overlapping images Drawer, depending on May not be applied Properties dialog boxPrinter’s Properties Ever, depending onApplication, the printing Orientation selected fromCopier to be printed Correctly, refer to Copies is Specified from Copy by usingHas priority differs Copies are not printedOrder to specify booklet Type and size Overhead projector trans Specified Tation, holes cannot bePunched at the top Overhead projector Transparency inter Num Symptom Possible Cause Remedy Description Ber Cover Orientation settings speciSpecify the paper Inter Interleaves or Warm restart operation Warm restart procedureWarm Restart Overview7662-4513-11 Copyright
Top Page Image Contents