PSC SP400rf manual Set, Nable Isable END

OCIA

INTERFACES

OCIA OPTIONS

Use these labels to change the settings as desired. The following brief descriptions explain each selection.

	Beep on Not on File — when enabled requires the scanner to
	beep when a label is scanned that is not on file. NCR 8 and 9 bit ONLY.
	Host Commands — when enabled allows the scanner to
	accept commands directly from the host. All OCIA types.
	Intercharacter Delay — refers to a pause, if any, between
	each character before being sent to the host. This time delay is
	used to control the flow of data from the scanner, but it should
	not be required for most applications. When enabled, OCIA
	intercharacter delay is set at 70∝s. All OCIA types.
	SET
		-------------------------------------
ON FILE		ENABLE ------------------------
BEEP	NOT ON	DISABLE -----------------------
HOST	OMMANDS	ENABLE ------------------------
	C	DISABLE -----------------------
NTERCHARACTER	DELAY	ENABLE ------------------------
		DISABLE -----------------------
I

END -------------------------------------

Go to the sections titled Symbology Selection and General Features in the back of this programming guide if you want to change any other factory settings for these interfaces.

12 SP400RF Programming Guide