STANDARD 2 OF 5 LABEL LENGTHS
Standard 2 of 5 Minimum Label Length — set the minimum label length required for I 2/5 labels (not including the check character). This feature is provided to ignore small label segments, reducing the possibility that a portion of a good label is incorrectly seen as an entire label.
Variable Length — If you select variable length, the scanner will recognize labels with an even number of digits between 01 and 50 digits.
Fixed Length — If you select fixed length, there are three labels for programming your scanner to read either one or two fixed lengths. The labels are:
•Set First Fixed Length — use this label to instruct the scanner that the next two programming labels you scan will define the first fixed label length. This setting can be any number of digits between 01 and 50 digits.
•Set Second Fixed Length — use this label to instruct the scanner that the next two programming labels you scan will define the second fixed label length. Again, this setting can be any number of digits between 01 and 50 digits.
•No Second Fixed Length — scan this label after setting the first fixed length to instruct the scanner to recognize only the label length chosen as the first fixed length.
NORMAL OR IATA SELECTION
Use these labels to select either normal, or IATA (International Airline Transport Association) format.
SET -------------------------------------
NORMAL STANDARD 2 OF 5
IATA STANDARD 2 OF 5 ------
END -------------------------------------
SYMBOLOGY SELECTION
61 |