•Set Second Fixed Length — use this label to instruct the scanner that the next two programming labels you scan will define the second fixed label length. Again, this setting can be any even number of digits between 04 and 50 digits.
•No Second Fixed Length — scan this label after setting the first fixed length to instruct the scanner to recognize only the label length chosen as the first fixed length.
SYMBOLOGY SELECTION
I 2 OF 5 CHECK DIGIT AND VARIABLE LENGTH LABEL SELECTIONS
These programming labels determine whether you compute and send the check digit contents.
If you want to set the scanner to read only fixed length labels, follow the procedures on the pages immediately following.
SET -------------------------------------
|
| DON'T COMPUTE |
IGIT |
| COMPUTE |
CHECK D |
| DON'T TRANSMIT |
|
| TRANSMIT |
|
|
|
ARIABLELENGTH LABELS |
| ENABLE |
| DISABLE | |
V |
| |
|
| |
|
|
|
END | ||
56 | SP400RF Programming Guide |